Pages

Saturday, October 29, 2016

Fall Cutie Tags


 
 
Again I was just playing with some FTU kits in the forum and made tags for members
Which I could remember the names I used
Just showing off

 photo RhondaSummer2016.png

Too Cute Too Spook - FTU


This is a tag I made just for fun in the forum
Can't remember the kit I used but wanted to show off tag

Something Sweet for Halloween - FTU



I forgot the template I used for this tag, need to write things down I quess
Used kit by Sylly Creationz called "A Not So Scary Halloween" found
Aweome kit with lots of different colors
You can use my tag as a referance quide
Halloween kit found HERE

Sexy Girl - FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You can purchase his tubes at his store HERE
FTU Scrap Kit by HorsePlay Pastures called "Pastels and Pearls" HERE
Template #828 by Millie HERE
Mask #151 by Millie HERE
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright

Click on layers 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
Add borders

Click on layers 3&4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
Add borders

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original
Add border

Click on layers 6&7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
Add borders

Click on right orange square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on layers 8&9 selections,select all, float,defloat
paste a close up of tube inside square
selection invert delete
select none delete the original
Add borders

Place your tube

Now add any other elements of choice
I used the following:
Element 10
Element 18
Element 19
Element 20
Element 21
Element 22
Element 29
Element 36
Element 44
Element 45
Element 62

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 29,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSummer2016.png

Alice in Wonderland - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Tony Tzanoukakis
You can purchase his tubes at his store HERE
PTU Scrap Kit by Kizzed by Kelz "Alice in Wonderland" HERE
Also purchased at Tony T as a bundle with kit
Template #19 by Just Like Candy Designs HERE
Mask of choice
Don't forget to leave a thank you when downloading

Move horz left to bottom
I added a border to my layers

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright

Click on back circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on center rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on horz rectangle left & right selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original

Click on lower orange rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on right orange square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on center red rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original

Click on center red circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original

Place your tube

Now add any other elements of choice
I used the following:
Bird
Books
Bottle
Cake on Plates
Charm
Chess Piece 2
Clock
Falling Cards
Key
Mad Hatter
March Hare
Queen Hearts Card
Sparkle
Sugar
Timeless Clock
Word Art

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 29,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSummer2016.png

Tuesday, October 18, 2016

Who Let The Ghosts Out? - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Elias Chatzoudis
Which you must obtain a license to use HERE
PTU Scrap Kit by Jens Sweet Temptations HERE
Template #65 by Millie HERE

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Delete copyright

Click on layer 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used a solid color
selection invert delete
select none delete the original
add noise and glow

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used solid color
selection invert delete
select none delete the original
I used a pixel font and write Who Let The Ghosts Out

Place your tube

Now time to add our elements
I used the following:
Element 14
Element 15
Element 18
Element 30
Element 32
Element 34
Element 35
Element 36
Element 41
Element 42
Element 44
Element 45
Element 47
Element 50
Element 56
Element 57
Element 60

Merge your layers
Open paper of choice and add mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 16,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSummer2016.png

Sunday, October 16, 2016

Witch of the Night - FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of VeryMany
Which you must obtain a license to use HERE
FTU Scrapkit by Bel Scrap HERE
 Santa Babe template by TwyztedT's Playroom HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright,word art and berries

Click on blk rec box selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on L&R blue rec selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1b
selection invert delete
select none delete the original

Click on upper & lower circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on L&R gray bar selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on light blue rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on L&R pic box selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

I added extra noise to the frames

Click on bars selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Place your tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Rbol
Arana 2
Brillos
Calabaza 2&4
Flor 1
Girasol
Hogas 1&2
Murcielago
Ramas
Varios
Verdura

Merge your layers
Open paper of choice and apply any mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 16,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSummer2016.png

Wendy Witch - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Miticheskaya
You must obtain a license to use this art HERE
PTU kit by Purple Dream Scraps called Black Wendy HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open element 44 resize and place in center
Click inside frame with wand
Selections expand by 10
Add new layer under frame
Open paper 1 and paste into selections

Place your main tube

Now time to add our elements
I used the following:
Element 1
Element 5
Element 6
Element 8
Element 10
Element 21
Element 22
Element 35
Element 36
Element 37
Element 38
Element 48
Element 50
Element 51
Element 54

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 16,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSummer2016.png

Saturday, October 15, 2016

Girlfriend Materail - FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You can purchase his tubes HERE
Template by Unique Styles  HERE
Please leave some love when you download

Resize elements to your liking

Ok Lets get Started:
Open template - Shift D to duplicate
Resize template to your desired size
Delete copyright

Click on raster 9 - change color to match tube you are using
Click on raster 2&5 - change color to match tube you are using
Click on raster 14&15 - change color to match tube you are using
Place close-up of tube in circle
Change blend mode to Luminious
Use any other elements you may have to tag

Place your main tube
Apply Xero Radiance

Merge your layers

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 15,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
 photo RhondaSummer2016.png

Frightful Delightful - FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Elias Chatzoudis
This tube was purchased at MPT which has closed
You can find his art at his new store HERE
FTU Scrapkit by Melissaz Creationz  HERE
Cluster by LindaNM found at Graphic Groupies HERE
Mask of choice

Ok Lets get Started:
Open cluster Shift D to duplicate and close original
Place tube to center of frame

Add any other elements you want from kit

Merge your layers
Open paper of choice & apply any mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 15,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSummer2016.png

Fight Like A Grl - FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Celinart Pinup
This tube was purchased at SATC which has closed
You can find her art now at different stores
FTU Scrapkit by Designs by Anorie HERE
Mask by Barbara HERE

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open frame 2 and place in center
Click inside frame with magik wand
Selections modify expand by 10
Add new layer under frame and select all
Open paper 4 and paste into selections
Select none

Place your tube & build around it

Now time to add our elements
I used the following:
Element 1
Element 3
Element 14
Element 15
Element 18
Element 19
Element 20
Element 21
Element 23
Element 26
Element 28


Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 15,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSummer2016.png

Check the Boobs - PTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Tony Tzanoukakis
You must obtain a license to use from his store HERE
PTU Scrapkit by Reineke Designs which was also purchased at Tony's store HERE
Can be bought separate or as a bundle
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open element 20 and place in center
Click inside frame with magik wand
Selections modify expand by 10
Add new layer under frame and select all
Open paper 10 and paste into selections
Select none

Place your tube & build around it

Now time to add our elements
I used the following:
Element 4
Element 5
Element 7
Element 9
Element 12
Element 13
Element 16
Element 18
Element 22
Element 23
Element 26
Element 27
Element 28
Element 29

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 12,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSummer2016.png

Beginning of Autumn - FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You must obtain a license to use from their store HERE
FTU clusters from Escape From Reality HERE
Mask of choice
Word Art of choice (I forgot to ave where I got mine from)

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open cluster 1  and place in center
Click inside frame with magik wand
Selections modify expand by 10
Add new layer under frame and select all
Open paper or solid color of choice and paste into selections
Select none
Use word art if desired (see my tag)

I used the other 2 clusters to decorate rest of tag
Use my tag as an example

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 12,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSummer2016.png

BC Awareness - FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Tony Tzanoukakis
You must obtain a license to use from his store HERE
FTU Scrapkit from Tiny Turtle Designs HERE
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open element 8  and place in center
Click inside frame with magik wand
Selections modify expand by 10
Add new layer under frame and select all
Open paper 3 and paste into selections
Select none

Place your tube & build around it

Now time to add our elements
I used the following:
Elements 5
Elements 6
Elements 13
Elements 17
Elements 23
Elements 34
Elements 72
Elements 93
Elements 105

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 12,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSummer2016.png

Pumpkin Load of Fall - FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Kajenna
You must obtain a license to use tube at PFD HERE
FTU Scrapkit by Sky's The Limit  HERE
Mask by Sylly Creationz (I used bottom one) HERE

Ok Lets get Started:
This is a very quick and easy tutorial
Resize elements to your liking and don't forget to drop shadow

Open blank canvas 700x700
Open frame 2 and place in center
Duplicate frame and move under first frame
Rotate bottom frame to the right (see tag for example)
Grab the magic wand & click inside top frame
Selections modify expand by 10
Add new layer under frame
Open paper 6 & paste into selection
Select none

Place your tube & build around it

Now time to add our elements
I used the following:
Acorns
Cluster
Cornucopia
Flower 2
Folliage 3
Indian Corn
Ivy
Leaf 2&8
Leafy Vine
Mushrooms
Pumpkins
Tree

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on zoctober 15,2016 by Rhonda photo RhondaSummer2016.png

Something Frightening Blog train - FTU



Welcome to The Taggers Lounge Blog Train!
Be sure to stop along the ride to collect your goodies!
Also please leave some love!!
Stop by The Taggers Lounge and join in on the fun also, we would love to have you.
http://thetaggerslounge.forumotion.com


http://thetaggerslounge.blogspot.com/  Stop 1
http://tagsbytika.blogspot.com  Stop 2
http://jenssweettemptations.blogspot.com  Stop 3
http://anorie.blogspot.de/  Stop 4
http://mytaggingaddiction.blogspot.com/  Stop 5
http://myzticdesignzz.blogspot.com/  Stop 6
http://rhondasrockindesignz.blogspot.com/   Stop 7
http://www.pamzygreene.blogspot.com/  Stop 8
 
Download HERE

Download HERE

Download HERE


 
 photo RhondaSummer2016.png

Monday, October 10, 2016

Dark Halloween Night - PTU


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Alehandra Vanhek
You can purchase his work at Hania's Design HERE
PTU Scrapkit by Hania's Design HERE
This can be bought as a bundle with clsters in pack
Mask #019 by Vix  HERE

Ok Lets get Started:
This is a very quick and easy tutorial
Open blank 700x700 canvas
Open element 102 & paste as a new layer
Click inside frame with magic wand
Expand by 10
Open new layer unfer frame and keep selected
Open paper 6 and place into selections
Select none

Place your tube where you want it and build around it

Add any other elements you want from the kit
I used:
Element 4
Element 8
Element 10
Element 65
Element 75
Element 76
Element 80
Element 83
Element 87
Element 88
Element 92

Merge layers
Open paper 2 & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 10,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSummer2016.png

Sunday, October 9, 2016

Check Your Rack - FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Arthur Crowe
Which you must obtain a license to use HERE
FTU Scrapkit by TopcatsTagz HERE
Template by Vaybs HERE
Mask #3 by Squirrely's Treehouse HERE

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template to your desired size
Canvas size 700x700
Delete copyright

Click on square 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original

Click on circle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on circle 3&4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on square 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper22
selection invert delete
select none delete the original

Click on circle 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on circle 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on circle 8&9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper19
selection invert delete
select none delete the original

Post close-up of tube inside inside circles
Apply Xero Radiane with settings of choice

Click on frame 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original
add noise with settings of choice

Click on frame 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original
add noise with settings of choice

Place your tube

Now time to add our elements
I used the following:
Element 8
Element 9
Element 13
Element 31
Element 48
Element 52

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 7,2016 by Rhonda photo RhondaSummer2016.png

Autumn Love -FTU



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Alehander Vanhek
You must obtain a license to use at PFD HERE
FTU Scrap Kit byGimptastic Tuts HERE
Template #789 by Millie HERE
Mask #2 by Dee HERE
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Increase canvas size to 700x700
Delete copyright, thin rectangle and heart

Click on lsyer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6 from add on
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on circle2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Decorate word art to your liking

Place your tube

Now time to add our elements
I used the following:
Bird 1&2
Branch
Butterfly
Flower 1&3
Flower Scatter
Log
Mushrooms 2
Nut
Squirrel
Tree
Elements from Add-On kit:
Apple Basket
Deco
Pumpkin
Wagon Wheel
Wreath

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 9,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSummer2016.png