Friday, June 28, 2013
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Keith Garvey
You must obtain a license to use his HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Angelina 2"
You an purchase this awesome kit at her store HERE
Template #295 from Missy HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
Eyecandy Gradient Glow
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas 700x700
Delete copyright,stars & small circles
 
Add Eyecandy Gradient Glow to wordart
 
Click on half circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on large rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper25
selection invert delete
select none delete the original
 
Click on circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on oval edge rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper38
selection invert delete
select none delete the original
 
Click on rectangle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper35
selection invert delete
select none delete the original
 
Click on other rectangle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original
add close up tube in rectangle
apply Xero Radiance with settings of choice
 
Place your main tube
Add Xero Radiance again
 
Now time to add our elements
I used the following:
Element 9
Element 14
Element 16
Element 23
Element 24
Element 26
Element 37
Element 39
Element 46
Element 52
Element 53
Element 58
Element 63
Element 75
Element 98
Element 114
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 28,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Thursday, June 27, 2013
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Jennifer Janesko
This tube was purchased at CILM which has closed
You can purchase her art now at CDO HERE
PTU Scrap Kit by Cindy from Chichi Designz's IB-Jennifer Janesko 137-3
You an purchase this awesome kit HERE
Top Template by Jackie Scottish Lass HERE
Mask of choice
Don't forget to leave a thank you when downloading
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 115% all layers
delete copyright layer & raster 3 layer
 
Click on raster 4 select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on the other rectangle layers select all, float,defloat
rotate papers from kit in the rectangles
selection invert delete

select none delete the original
Place your main tube in center where desired
 
Now time to add our elements
I used the following:
Bird
Brush
Butterflies
Butterfly
Fan
Flowers 1
Flowers
Harp
HeartBrush
KeyBow
Lace 2
Musicpaper
Pillow
Wordart
 
Merge your layers
Open paper 5 & apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 27,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Keith Garvey
You can find purchase his art HERE
PTU Scrap Kit by Jen from Sweet Temptations called "Little Firecracker"
You an purchase this awesome kit HERE
Template #34 by Flaminsal HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
Penta Color Dot
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x670
delete copyright
 
Click on pink circle  selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
 
Click on black oval 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
 
Click on grey rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on dotted rectangle selections,select all, float,defloat
add new layer and flood fill with white
selections invert delete
select none delete the original
 
Click on white rectangle selections,select all, float,defloat
add new layer and flood fill with red
selections invert delete
select none delete the original
apply Penta Color Dot with settings of choice
 
Click on black circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on circle border & dotted circle selections,select all, float,defloat
add new layer and flood fill with white
selections invert delete
select none delete the original
 
Click on square 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Click on square border 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Place your main tube
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Balloons
Birdhouse
Cat
Cupcake
Fireworks 3&8
Hat
Heart
Ribbon
Star 1
USA Blocks
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 27,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Monday, June 24, 2013
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Zindy S.D. Nielsen
You must obtain a license to use her art at her store HERE
PTU Scrap Kit by Devilish Dezines Scraps called "Trishas Realm"
You an purchase this awesome kit at Designer Scraps HERE
Mask of choice
 
Ok Lets get Started:
Open blank canvas 700x700
Open frame 1 & place in center - resize to liking
Rotate frame 90 to right
Grab the magic wand & click inside the frame
Selections modify expand by 5
Open paper 3 and paste as new layer
Selections Invert Delete
Move paper under frame
Place your main tube where you desire

Now add any other elements you want to your tag
I used:
Element 6
Element 15
Element 19
Element 26
Element 27
Element 32
Element 33
Element 42
Element 50
 
Merge your layers
Open paper 1 and apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 24,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Sunday, June 23, 2013
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Barbara Jensen
You must obtain a license to use her art at her store HERE
PTU Scrapkit by Nicky from Inzpired Creationz called "Aged Beauty"
You can purchase this kit HERE 
Plugins Used:
Xero Radiance
 
This kit is jammed pack with beautiful elements & papers
It is a must have kit!!!!!!!!!!!!!!
TY Nicky for allowing me to use your awesome designs
 
Ok Lets get Started:
This is a very quick and easy tutroial
Open window and place to the left of canvas
Using the frehand tool draw around the element
Open paper 10 & place as new layer
Selections invert delete
Move paper under window
Place main tube to right of window
apply Xero Radiance with settings of choice

Add any other elements you want from the kit
I used:
Bow 1
Brooch 2&3
Cluster 2
Door
Envelope
Heart 2
Sparkles 2
Violin
WA 1
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 24,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Zlata_m
You can purchase her work at PFD HERE
PTU Scrap Kit by Mizteeque from  called "Summer Fresh"
You an purchase this awesome kit HERE
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open blank 700x700 canvas
Open element 31 & resize
Move over to left hand side
Duplicate frame and mirror
Merge the 2 frames together
Grab the freehand tool and draw around frame
Open paper 14 & paste as new layer
Selections invert delete
Move paper under frame
 
Place tube of choice in center of frame
Apply Xero Radiance with settings of choice

I always build around my tube
I added the following elements:
Element 5
Element 12
Element 21
Element 22
Element 25
Element 23
Element 27
Element 28
Element 29
Element 31
Element 35
Element 36
Element 39
Element 41
Element 42
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 23,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Saturday, June 22, 2013
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Jamie Kidd
This tube was bought at CILM which has closed
You can find her work now at CDO HERE
PTU Scrap Kit by Jen from Sweet Temptations called "Sink or Swim"
You an purchase this awesome kit HERE
Template #264 by Millie's from Millies PSP Madness HERE
Mask #8 by Chrissy Chaos HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
Eyecandy 4000 Gradient Glow
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright
 
Click on Layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
 
Click on Layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original
 
Click on Layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper17
selection invert delete
select none delete the original
 
Click on Layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
 
Click on Layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
 
Click on Layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper18
selection invert delete
select none delete the original
 
Click on Layers 7&8
change colors to match tube
apply Eyecandy gradient Glow
 
Place your main tube
Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Clam
Fish 1,2,3,4&5
Parrot
Ring
Sandcastle
Starfish
Surfboard
Wave
 
Merge your layers
Open paper 10 & apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 22,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Very Many
You must obtain a license to use this art at SATC HERE
PTU Scrapkit by Nicky from Inzpired Creationz called "Princess"
You can purchase this kit HERE
Mask of choice
 
Plugins Used:
Xero Radiance
Eyecandy 4000 Gradient Glow
 
Ok Lets get Started:
This is a very quick and easy tutorial
Open blank 700x700 canvas
Open frame 1 & paste as a new layer
Grab the freehand tool and draw around frame
Open paper 15 from kit and paste as new layer
Selections invert delete
Move paper under frame

Place your tube where you desire
apply Xero Radiance with settings of choice
 
Add any other elements yo want from the kit
I used:
Bling cake
Bottles
Boxes
Butterfly 2
Cupcake 2
Dog
Pearls 3
Rose 1&2
Sparkles 1
WA 3
 
Merge layers
Open paper 6 & apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 22,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Thursday, June 20, 2013
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
You must obtain a license to use this art at his store HERE
PTU Scrap Kit by Krissys Scraps called "Back Off Bitches"
You an purchase this awesome kit at Designer Scraps HERE
Mask of choice
 
Ok Lets get Started:
Open blank canvas 700x700
Open frame 1 & place in center - resize to liking
Grab the magic wand & click inside the frame
Selections modify expand by 5
Open paper 10 and paste as new layer
Selections Invert Delete
Move paper under frame

Place your main tube in center of tag

Now add any other elements you want to your tag
I used:
Label 1
Wire Heart 3
Button 4
Brad 1
Flaming Skull 1
Bird Hand 2
Cupcake 1
Bloom 1,2,3&4
 
Merge your layers
Open paper 5 and apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 20,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Tuesday, June 18, 2013
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Jose Cano
This tube was bought at PTE which has closed
You can now purchase his art at SATC HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Beach Parfait"
You an purchase this awesome kit at her store HERE
Template #265 from Millie HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
Filters Unliminted 2.0
Eyecandy 4000
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas 700x700
Delete copyright & raster 8
 
Click on raster 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
 
Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original
 
Click on raster 3&4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper23
selection invert delete
select none delete the original
 
Click on raster 5&6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Click on raster 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper19
selection invert delete
select none delete the original
 
Click on raster 9&10 selections,select all, float,defloat
paste a paper of choice or color of choice
selection invert delete
select none delete the original
apply Filters Unliminted Mineral Paper Sandstone
apply Eyecandy Gradient Glow
 
Place your main tube
Add Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Element 1
Element 7
Element 8
Element 10
Element 14
Element 19
Element 24
Element 28
Element 36
Element 41
Element 48
Element 54
Element 57
Element 58
Element 59
Element 67
Element 68
Element 75
Element 77
Element 84
Element 86
Element 87
Element 89
Element 92
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 19,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Sunday, June 16, 2013
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
No tube needed for this tutorial
FTU Scrap Kit by Wicked Princess Scraps called Give Me Wings HERE
Mask #9 by Gina's Gems HERE
Just right click and save to computer
Don't forget to leave a thank you when downloading
 
Plugins Used:
Mura Meister Cloud
 
Ok Lets get Started:
Open blank 700x700 canvas
Open floral frame - resize 80%
Grab the freehand tool and draw around frame
Open paper 4 & paste as new layer under frame
DON'T DESELECT YET
Apply Mura Meister Cloud filter to paper
DESELECT
Open fairy fountain - resize 30%  - place at bottom left of frame
Open sign - mirror resize 40% - place at bottom right of frame
Open pond - resize 50% - place beside sign
Open fairy home - resize 30% - place at bootm left of frame beside pond
Open calla lilly - resize 32% - place behind fairy home
Open bauganvilla flower - resize 32% - place behind pond
Open fairy 1 - resize 72% - place to right of tag
Open butterfly 2 - resize 21% - place beside fairy tube
 
Merge your layers
Open paper 2 & apply mask
 
Place your name where you like it
Follow Wicked Princess TOU for crediting her kits
Resize to your liking and save as PNG
This tutorial was created on June 9,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Jennifer Janesko
This tube was bought at CILM which has closed
You can now purchase her work at CDO HERE
PTU Scrap Kit by Cindy from Chichi Designz's IB-Jennifer Janesko 71-3
You an purchase this awesome kit HERE
Mask of choice
 
Filters Used:
Xero Radiance
 
Ok Lets get Started:
Open blank 700x700 canvas
Open frame 1 - paste as new layer
Place your main tube in frame
Apply Xero Radiance with settings of choice
Duplicate tube and move above frame
Erase any parts hanging out of frame on bottom
Open music sheets amd place to top inside of frame
Duplicate and mirror
Open cluster and move behind tube
 
Now time to add other elements
I used the following:
Bow 2
Butterfly
Parrot
Ribbon
Sparkles
Wordart
 
Merge your layers
Open paper 2 & apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 16,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Saturday, June 15, 2013
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Misticheskaya
You can purchase his tubes at SATC HERE
PTU Scrap Kit by Mizteeque from  called "Orange Medley"
You an purchase this awesome kit HERE
 
Plugins Used:
Xero Radiance
 
Ok Lets get Started:
Open blank canvas 700x700
Open element 45 & resize 80%
Click inside frame with magic wand & expand by 10
Open paper 7 & place as new layer
Selections invert delete
Move paper under frame
 
Place tube of choice where desired
apply Xero Radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Element 6
Element 8
Element 13
Element 14
Element 16
Element 20
Element 29
Element 34
Element 36
Element 38
Element 39
Element 42
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 15,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Pinup Toons
This tube was purchased at CILM which has closed
You can now find his work at CDO HERE
FTU Scrap Kit By Gimptastic Tuts called "Shop Till You Drop" HERE
Mask of choice
Please leave some love when you download
 
Resize elements to your liking
 
Ok Lets get Started:
Open a blank image 700x700
Open frame 4
grab magic wand and click inside frame
Selections modify expand by 5
Open paper 8 and paste as new layer
Selections invert delete
Move paper below frame
 
Open tube and place to right hand side of frame
 
Now lets add our elements
Banner
Bottle
Credit Card
Dollar Day
Heel
Lotion
Money
Nail Polish
Purse
Sale
Star
WA 1
 
Merge your layers
Open paper 10 from kit and place as a new layer
apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 15,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Monday, June 10, 2013
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Arthur Crowe
You must obtain a license to use his work HERE
PTU Scrap Kit by from Alikas Scraps called "Awesome Sauce"
You an purchase this awesome kit at Pimp My Tags With Scraps HERE
Mask by Candy's Treat HERE
 
Ok Lets get Started:
Open blank 700x700 canvas
Place your main tube where you want it and build around it
This kit is loaded with great elements so have fun!!!!!
 
Here are the elements I used:
Element 4
Element 5
Element 7
Element 8
Element 9
Element 10
Element 17
Element 18
Element 30
Element 31
Element 36
Element 43
Element 45
Element 49
Element 50
Element 62
 
Merge your layers
Open paper 2 & apply last mask in the zip file
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 10,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Isamel Rac
You can purchase his tubes at his store HERE
PTU Scrap Kit by Kristin from Toxic Desirez called "Metal Babe"
You can purchase this at any of these stores HERE
Template #44 from Flaminsal HERE
Don't forget to leave a thank you when downloading
 
Plugins Used:
Xero Radiance
Penta Color Dot
PhotoEffex Scanlines
Eyecandy for wordart
 
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright
 
Click on grey oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
 
Click on black rectange selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
 
Add closeup of tube inside rectangle
apply Xero Radiance with settings of choice
apply Photo Scanlines
 
Click on all frame layers selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
add noise with settings of choice
 
Click on red rectangle 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
apply Penta Color Dot
 
Click on pink rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original
 
Click on grey rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
 
Arrange wordart & add Eyecandy Gradient Glow
 
Place your main tube
apply Xero radiance with settings of choice
 
Now add any other elements of choice
I used the following:
Bow 1
Chain
Cuff
DJ Mixer
Flame
Flower 1&3
Records & CD's
Skull & Guitars
Splatter 1&2
 
Merge your layers
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 10,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Wednesday, June 5, 2013
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Sonia Roji
Which you must obtain a license to use at CDO HERE
PTU Scrap Kit by Cindy from Chichi Designz's IB-Amy Matthews 17-1
You an purchase this awesome kit HERE
Mask #271 by Insatiable Dreams HERE
Don't forget to leave a thank you when downloading
 
Filters Used:
Penta Color Dot
Xero Radiance
Eyecandy 4000 Gradient Glow
 
Ok Lets get Started:
Open blank 700x700 canvas
Open cluster frame - resize 72%
Duplicate frame and place side by side
Use the eraser tool to make the frame appear as 1 frame
Grab the freehand tool and draw around frame
Open paper 7 and paste under frame
Selections invert delete
Apply Penta Color Dot with settings of choice
 
Place your main tube in center of frame
Apply Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Brush
Fan
Flower
Flowers
Ribbon 2
Swirl
Wordart
 
Merge your layers
Open paper 3 & apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 4,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Monday, June 3, 2013
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Eugene Rzhevskii
This tube was the May gift from PFD
You must obtain a license to use this art at PFD HERE
PTU Scrap Kit from Designs by Sarah called "Ahoy"
You an purchase this awesome kit at Pimp My Tags With Scraps HERE
Mask #21 from Gems Taggin Scraps HERE
 
Plugins Used:
Xero Radiance
 
Resize your elements to your liking
 
Ok Lets get Started:
Open blank canvas 700x700
Open frame 5 resize 85% & position in center
Grab the magic wand and click inside frame
Selections modify expand by 6
Open paper 1 and place under frame
Selections invert delete
Open wave 1 and place at bottom of frame
Open wave 2 and place under other wave but move up
 
Place your main tube to right of frame
Apply Xero Radiance with settings of choice
 
Now add any other elements you want to your tag
I used:
Anchor
Bird
Flower 1&2
Life Perserver
Ship
Tag 1
Wordart
 
Merge your layers
Open paper 2 & apply mask of choice
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 3,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of VeryMany
Which you must obtain a license to use at their store HERE
PTU Scrap Kit by Cindy from Chichi Designz's IB-Jessica Dougherty 42-2
You an purchase this awesome kit HERE
Mask of choice
Filters Used:
Xero Fritillary
Xero Radiance
Eyecandy 4000 Gradient Glow
 
Ok Lets get Started:
Open blank 700x700 canvas
Open frame 2 - resize 84%
Open cluster frame - resize 85%
Duplicate frame 2
Place on each side of cluster frame
Click inside cluster frame with magic wand
Selections modify expand by 10
Open paper 1 and paste under frames
Selections invert delete
 
Place your main tube in frame to the left
Apply Xero Radiance with settings of choice
 
Now time to add our elements
I used the following:
Bubbles
Cuffs
Shoe
Sparkles
Whip
Wordart Shadowed
 
Merge your layers
Open paper 4 & apply mask
 
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 4,2013 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Grab My Blinkie

tk-Rhondas-Designz-blinkie

About Me

Hello friends and welcome to my blog!!! My name is Rhonda and I live in South East Ga., little town called Lumber City. I have 2 sons, 2 DIL's and 3 grandchildren. I work in healthcare as an RN.

When not working, I enjoy playing in PSP. It has been my passion over 20 years. PSP is relaxing and takes my mind away from troubles of life. I enjoy writing tutorials on my downtime.

I am expanding my creations to frames, clusters, templates and hopefully masks. I have NEVER made a mask but I have the time to learn now and I am excited. These will be FTU, all I ask is please download from the blog and if you are in a group or forum please send others to my blog and DO NOT HOTLINK. I would love to see your creations and show them off.

If you need to contact me with any questions concerning my tutorials or creations, send me an email. I am aware some of my older tutorials have links that are no longer working due to designers closing their blog. This is beyond my control. I am unable to share anything which was not shareable before. I honor all designers TOU.

I CT For

I don't CT that much any longer but these are designers who allow me to use their kits as show-off's.
Photobucket
Photobucket
Photobucket

T.O.U.

All tutorials that are on my blog have been written by me. Any resemblance to another tag or tutorial is purely coincidental. Please do not copy and claim as your own. You are welcome to use these tutorials in any groups or forums but please link back to my blog. I would love to see any tag that is made using my tutorial. If you have any questions or concerns you can contact me at rsheath31549@yahoo.com.

Cluster Frames are Personal Use ONLY!!!! Please do not claim them as your own or rip them apart. You are welcome to use in forums or groups but please link back to blog. My TOU are included in the downloads. I would love to see any creations you make with my tuts or other creations. Send them to me and I will display them.

My goal for this blog is to make creations others can use and enjoy. I want to focus on being positive through difficult times. Show importance of accepting others, no judging, just respect. Showing kindness to others can change another's life, even for a brief time
Powered by Blogger.

Search

Blogs I Visit

Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket

Blog Archive

Followers