Wednesday, September 30, 2015


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Elias Chatzoudis
Which you must obtain a license to use HERE
PTU Scrap Kit by Jen from Sweet Temptations
You can purchase this awesome kit from one of her stores HERE
Template #171 by Blissfully Beth HERE
Zip files are on left hand side of blog
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Delete copyright

I added a border to all my circles with noise at 99%

Click on gray circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on black circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on white circle 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on white circle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on maroon circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on white circle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Merge word art

Place your tube

Now time to add our elements
I used the following:
BFly 1&2
Carousel
Castle
Decor 1&2
Flowers 5
Hummingbird
Ivy
Lamp
Tree

Merge your layers
Open paper 8 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 30,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png
Tuesday, September 29, 2015


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Toriya
You must obtain a license to use this art at S&Co HERE
PTU Scrapkit from Bibi that matches the tube HERE
Collab Template #1 by Millie & Dee HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright, bottom blue & orange rectangle and bottom dotted rectangle

Click on top orange rectange selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on right & left blue circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on right & left black circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original

Click on top green rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on orange middle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on purple middle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original

Click on green middle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
add noise

Click on dotted middle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original

Click on top blue rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on top dotted rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Add noise to star
Decorate word art as you choose or leave as is

Place your tube

Now time to add our elements
I used the following:
Element 17
Element 24
Element 25
Element 40
Element 42
Element 45
Element 55
Element 56
Element 57
Element 92
Element 119
Element 128
Element 140
Element 154

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 29,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Pinup Toons
You can purchase these tubes at CDO HERE
FTU Scrapkit by HorsePlay's Pasture Desgns HERE
Kit is called Punkin Pickin' Time
Fall Template #2 TwyztedT's Playroom HERE
Mask #36 by Chrissy Chaos HERE
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template to your desired size
Increase canvas size if needed
Delete copyright. I deleted all small squares except top one

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on layer 13 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on raster 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on raster 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original

Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
I applied to a texture to the leaf

Place your main tube

Now add any other elements of choice
I used the following:
Element 1
Element 3
Element 8
Element 14
Element 20
Element 21
Element 22
Element 33
Element 34
Element 36
Element 47
Element 48
Element 49
Element 53
Element 56

Merge your layers
Open paper 5 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 28,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You must obtain a license to use HERE
FTU Scrapkit from Gold Dust HERE
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open frame 2 & paste in center
Open frame 5 & paste on top
Merge the two layers as one
Click inside with magic wand & expand by 10
Open paper 7 and paste as new layer
Selections invert delete
Move paper under frame

Place your main tube & build around it

Now time to add our elements
I used the following:
Basket 2
Basket of Apples
Bird
Gourds
Spray 2&3
Leaf 1&6
Mushroom 3&5
Pinecomb
Pumpkin 1
Squirrel 2
Sticker
Tree 3

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 28,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png
Saturday, September 26, 2015


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlatam_M
You can purchase this work HERE
FTU Scrapkit by Topcat HERE
JME_Lost Template#2 HERE
Mask #6 by Allison's Addictions HERE
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 94% all layers
Increase canvas to 700x700
Deleted copyright,word art,vine and thin line

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Place your tube to center of tag
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Element 4
Element 9
Element 11
Element 29
Element 36
Element 38
Element 40
Element 41
Element 44

Merge your layers
Open paper 13 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 15,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You can purchase these tubes HERE
FTU kit by Melissaz Creationz HERE
Mask by Rachel Designs HERE

Ok Lets get Started:
Open blank canvas 700x700
Open cluster and place to center
Using selection tool draw around cluster
Open new layer under cluster
Open paper 1 & paste into selection
Select none

Place your tube where you want it
Add your elements around the tube
Here are the ones I used:
Elements 4
Elements 5
Elements 14
Elements 19
Elements 20
Elements 21
Elements 23
Elements 24

Merge layers
Open paper 4 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 26,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
 photo RhondaSigFall2.png


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Danny Lee
You must obtain a license to use his art at S&CO HERE
PTU Scrapkit by Kizzed by Kelz called "Sexy Autumn" at S&CO HERE
Mask of choice

Ok Lets get Started:
This is a very quick and easy tutorial
Open blank canvas 700x700
Open element 115 & place in center
Grab the magic wand & click inside frame
Selections modify expand by 10
Add new layer under frame
Open paper 4 & paste into selections
Select none

Place main tube to right of tag

Add any other elements you want from the kit
I used:
Element 6
Element 7
Element 17
Element 28
Element 29
Element 30
Element 31
Element 36
Element 54
Element 59
Element 62
Element 73
Element 78
Element 79
Element 80
Element 81
Element 82
Element 92
Element 101
Element 102

Merge layers
Open paper 26 & apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 26,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png
Thursday, September 24, 2015


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Danny Lee
You can purchase his tubes at S&CO HERE
PTU Scrap Kit by Purple Dream Scraps called Autumn Blessing
You can purchase this awesome kit at one of her stores HERE
Mask of choice

Ok Lets get Started:
Open a blank image 700x700
Open element 45 and place as a new image
Grab the magik wand and click inside frame
Select modify expand by 10
Open paper 4 and place as a new layer
Selections invert - delete
Move paper under frame

Place your tube

Now add any elements of choice
I used the following:
Element 1
Element 2
Element 4
Element 10
Element 16
Element 17
Element 19
Element 20
Element 23
Element 24
Element 27
Element 28
Element 29
Element 30
Element 32
Element 33
Element 35
Element 36
Element 37
Element 41
Element 43
Element 52
Element 53
Element 54

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 23,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Misticheskaya
You can purchase these tubes at PFD HERE
PTU Scrap Kit by Ginnibug Designz HERE
I purchased this kit from S&CO called Orange Autumn HERE
Template #695 by Millie HERE
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright,layers 8&9

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper17
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper21
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper22
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper23
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper20
selection invert delete
select none delete the original

Decorate wordart to your liking

Place your tube
apply Xero radiance with settings of choice

Now add any other elements of choice
I used the following:
Element 20
Element 21
Element 23
Element 32
Element 47
Element 61
Element 72
Element 82
Element 94
Element 99

Merge your layers

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 23,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You can purchase their work at their store HERE
FTU Scrap Kit by HorsePlay's Pasture Designs HERE
Kit called Autumn Sunset
Template #186 by Denz Designz HERE
Mask of choic3
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Deleted copyright, heart line & small circles

Click on red strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on pink square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on black circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on pink circle 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original

Click on back 1&22 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on frame 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on black strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on red strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
Place your main tube to left of tag
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Element 16
Element 17
Element 18
Element 12
Element 13
Element 14
Element 18
Element 19
Element 37
Element 40
Element 48
Element 49
Element 52
Element 53
Element 55
Element 59
Element 61
Element 74
Element 76
Element 80

Merge your layers
Open paper 12 and apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Sptember 22,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png
Monday, September 21, 2015



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Ellie_Milk
You must obtain a license to use HERE
FTU Scrapkit from Topcats Tagz HERE
Cluster by Maria HERE
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open cluster and place in enter of canvas
Click inside with magic wand & expand by 10
Open paper 4 and paste as new layer
Selections invert delete
Move paper under frame

Place your main tube & build around it

Now time to add our elements
I used the following:
Element 14
Element 54
Element 61
Element 70

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 21,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Misticheskaya
You can purchase these tubes at PFD HERE
FTU Scrap Kit by TopcatsTagz HERE
Template #240 by Denz Designz HERE
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 110%
Canvas size 700x700
Delete copyright,dotted outline 1,shape 1,

Click on shape 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original

Click on dotted outline selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on circle 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original

Click on circle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper19
selection invert delete
select none delete the original

Click on shape 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original

Click on circle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on small rectangles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Place your main tube
apply Xero radiance with settings of choice

Now add any other elements of choice
I used the following:
Element 4
Element 5
Element 8
Element 11
Element 12
Element 13
Element 18
Element 21
Element 24
Element 25
Element 46
Element 53
Element 54
Element 57
Element 58

Merge your layers

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 21,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png



This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Anna Marine
You must obtain a license to use this art at CDO HERE
FTU Scrap Kit by BeckyP's Creations HERE
Template by Gimptastic Tuts HERE
Mask of choice
Don't forget to leave a thank you when downloading

Resize elements to your liking and drop shadow to your preference

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 132%
Canvas size 700x650
Deleted copyright & wordart

Click on layers 7&8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Place your tube to left of tag
Xero Porcelin with settings of choice

Now time to add our elements
I used the following:
Open element 4 & place to center of middle circle toward bottom
Open tree and place to right hand side of tag
Open element 1 and place in front of tube to left
Open flowerpot 1 and place beside tube to the right
Open element 6 and place to right hand side
Open flower 2 and place beside tree to right hand side
Open element 5 and place on top of leaves (looks like propped on tree)
Open element 8 and place to right hand side beside rake
Open fall sag and place to bottom of tag
Open element 9 and place beside apple basket
Open squirrel and place beside acorns (acorns behind squirrel)
Open element 7 and place wherever you want
Open butterflies of choice and place where you want

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 8,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You must obtain a license to use HERE
FTU Scrapkit from Squyrrely's Treehouse HERE
Mask #16 by Lori at Scrap it Studio HERE

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x675
Open element 18 and place in center
Click inside with magic wand & expand by 10
Open paper 7 and paste as new layer
Selections invert delete
Move paper under frame

Place your main tube & build around it

Now time to add our elements
I used the following:
Element 1
Element 2
Element 5
Element 7
Element 8
Element 10
Element 13
Element 15
Element 19
Element 24
Element 27
Element 29
Element 30

Merge layers
Open paper 1 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 19,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png
Friday, September 18, 2015


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Danny Lee
You must obtain a license to use this art at S&Co HERE
PTU Scrapkit from Whisper In The Wind called "Fall Fashion"
You can purchase this awesome kit at S&Co HERE
Template #283 by BeckyP's Creation HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Increase canvas to 700x700
Delete copyright
I deleted all the leaves except 5&8

Colorize word art to your liking

Click on center circle fill selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on center circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
add noise

Click on frame fills selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Place your main tube

Now time to add our elements
I used the following:
Element 50
Element 56
Element 62
Element 78
Element 79
Element 80
Element 82
Element 84
Element 87
Element 95

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 18,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You can purchase this tube HERE
PTU Scrapkit by Lori at SIS HERE
Mask of choice

Ok Lets get Started:
This is a very quick and easy tutorial
Open blank canvas 700x700
Open frame 1 & place in center
Grab the magic wand & click inside frame
Selections modify expand by 10
Add new layer under frame
Open paper 9 & paste into selections
Keep selected and open misc 3
Add new layer and paste into selection
Change blend mode to soft light
Select none

Place tube to your tag

Add any other elements you want from the kit
I used:
Apple
Branch
Branch 2
Clock
Flower 1
Heart
Leaves
Leaves 1
Misc 1&2
Scroll

Merge layers
Open paper of choice & apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 18,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental



 photo RhondaSigFall2.png


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Arthur Crowe
You must obtain a license to use this art HERE
PTU Scrapkit by Lysiras Graphic World HERE
I purchased kit and tube together at Crowe's Store
Template #384 by Missy HERE
Mask of choice
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 90%
Canvas size 700x700
Deleted copyright, layers 4,11,16

Click on layer 12 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 13 & copy of 13 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 6 and copy of 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on layer 17 selections,select all, float,defloat
paste a close-up of tube inside rectangle
selection invert delete
select none delete the original
apply Xero Radiance with settings of choice

Colorize raster 9 using the Hue & Saturation
Color word art to your liking

Place your main tube in center
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Element 2
Element 6
Element 8
Element 14
Element 17
Element 20
Element 23
Element 26
Element 29


Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 18,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Jose Cano
You can purchase his tubes HERE
PTU Scrap Kit by Purple Dream Scraps called Gothic_Night
You can purchase this awesome kit from one of her stores HERE
Mask of choice

Ok Lets get Started:
Open a blank image 700x700
Open element 23 and place as a new image
Grab the magik wand and click inside frame
Select modify expand by 10
Open paper 2 and place as a new layer
selections invert - delete

Place your main tube
Xero Radiance with settings of choice

Now add any elements of choice
I used the following:
Element 1
Element 2
Element 3
Element 4
Element 6
Element 20
Element 25
Element 26
Element 29
Element 39
Element 40
Element 42
Element 43

Merge layers
Open paper 09 and apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 13,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Jose Cano
Tube was purchased at MPT which has closed
You can purchase these tubes at Cano Store HERE
PTU kit by Jen from Sweet Temptations called "Shadow Girl"
You can purchase this kit at one of her stores HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open frame 2 & place in center
Open frame 3 resize a litle and place on top
merge the 2 frames as one
Click inside frame with magic wand
Selection modify expand by 20
Open paper 9 & place as a new layer
Selections invert delete
Move paper under frame

Behind the main frame I used frames 1&4
use whatever you like

Place your main tube

Add elements around the tube
I used the following:
Bear
Bomb
Dog
Heart
Lipstisk
Mask
Music Note
Nail Polish
Ribbon
Skull
Speakers
Spiderwebs
Swans

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 13,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Alex Prihodko
You can purchase this tube at PFD HERE
FTU scrapkit by Megan Turnidge HERE
Mask by Rabid Bunny HERE
Please leave some love when you download

Resize elements to your liking

Ok Lets get Started:
Open a blank 700x700 image
Open frame 2 and place in center
Click inside with magic wand & expand by 10
Open paper 3 & paste as new layer
Selections invert delete
Select none

Place your main tube
Apply Xero Radiance

Now add any other elements of choice
I used the following:
Berries 1&2
Button
Cinnsticks
Flower 1
Gem
Heart 1
Leaf 1,2,3
Leaf pile 1&2

Merge your layers
Open paper 5 & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 15,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
 photo RhondaSigFall2.png


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Stellafelice7
You can purchase this work at PFD HERE
FTU Scrap Kit by Irish Princess Designs HERE
Fall Template by Melissaz Creationz HERE
Mask of choice
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Deleted copyright

Click on layer 5 & copy of 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 4 & copy of 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
add noise

Color leaves with any color you desire
I used Filters Unliminted to give texture

Click on layer 6 selections,select all, float,defloat
paste close-up of tube to top square
selection invert delete
select none delete the original
apply Xero Radiance with setings of choice

Click on merged layer selections,select all, float,defloat
add new layer & flood fill with solid color
select none delete the original
add noise with settings of choice

Colorize word art to your liking
I added noise to mine

Place your tube to left of tag
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Apples
Bird
Botles
Corn
Flowers
Ladybug
Leaves
Mushrooms
Pinecone
Ribbon

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 15,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo RhondaSigFall2.png
Monday, September 7, 2015


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You must obtain a license to use this art HERE
FTU Scrapkit by Angela'z Creationz HERE
Template by Vaybs HERE
Mask of choice
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Deleted copyright & word art

Click on right & left squares selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on elipse front selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on right & left circle bkg selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on right & left circle front selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on left bottom circle front selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on frame bkg squares selections,select all, float,defloat
paste a close-up in each frame
apply Xero Radiance
selection invert delete
select none delete the original

Click on frame selections,select all, float,defloat
Use the Hue & Saturation filter for color of choice

Place your main tube in center
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Element 3
Element 4
Element 6
Element 10
Element 11
Element 12
Element 14
Element 15
Element 18
Element 22
Element 24
Element 40
Element 48

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 7,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental




This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Jennifer Janesko
This tube was purchased at CILM which has closed
You can purchase her art now at CDO HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Remember"
You can purchase this awesome kit at her store HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open element 49 and place in center of canvas
Grab the magic wand and click inside frame
Selections modify expand by 5
Open Paper 46 & paste as new layer
Selections invert delete
Move paper under frame

Place tube where desired
Apply Xero Porcelin with settings of choice

Now lets add our elements around the tube
I used:
Element 5
Element 19
Element 23
Element 43
Element 44
Element 45
Element 46
Element 47
Element 48
Element 75
Element 85
Element 90
Element 91
Element 93
Element 97
Element 127

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 7,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental




This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Elias Chatzoudis
Which you must obtain a license to use at his store HERE
FTU Scrapkit by Gimptastic Tuts HERE
Template #194 by Gimptastic Tuts HERE
Mask of choice
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 122%
Canvas size 700x700
Delete copyright,wordart & hearts

Click on layers 12&13 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on layer 11 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on layers 4,8 & 10 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
add noise with settings of choice

Click on layer 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Place your main tube

Now time to add our elements:
Bow
Bowls
Boxes
Buttefly
Cloud
Flower 1,2&3
Honey Jar
Leaf 2
Pot
Scatter
Vine
Watering Can

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on September 7,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo SigRhondaSpring.png

Grab My Blinkie

tk-Rhondas-Designz-blinkie

About Me

Hello friends and welcome to my blog!!! My name is Rhonda and I live in South East Ga., little town called Lumber City. I have 2 sons, 2 DIL's and 3 grandchildren. I work in healthcare as an RN.

When not working, I enjoy playing in PSP. It has been my passion over 20 years. PSP is relaxing and takes my mind away from troubles of life. I enjoy writing tutorials on my downtime.

I am expanding my creations to frames, clusters, templates and hopefully masks. I have NEVER made a mask but I have the time to learn now and I am excited. These will be FTU, all I ask is please download from the blog and if you are in a group or forum please send others to my blog and DO NOT HOTLINK. I would love to see your creations and show them off.

If you need to contact me with any questions concerning my tutorials or creations, send me an email. I am aware some of my older tutorials have links that are no longer working due to designers closing their blog. This is beyond my control. I am unable to share anything which was not shareable before. I honor all designers TOU.

I CT For

I don't CT that much any longer but these are designers who allow me to use their kits as show-off's.
Photobucket
Photobucket
Photobucket

T.O.U.

All tutorials that are on my blog have been written by me. Any resemblance to another tag or tutorial is purely coincidental. Please do not copy and claim as your own. You are welcome to use these tutorials in any groups or forums but please link back to my blog. I would love to see any tag that is made using my tutorial. If you have any questions or concerns you can contact me at rsheath31549@yahoo.com.

Cluster Frames are Personal Use ONLY!!!! Please do not claim them as your own or rip them apart. You are welcome to use in forums or groups but please link back to blog. My TOU are included in the downloads. I would love to see any creations you make with my tuts or other creations. Send them to me and I will display them.

My goal for this blog is to make creations others can use and enjoy. I want to focus on being positive through difficult times. Show importance of accepting others, no judging, just respect. Showing kindness to others can change another's life, even for a brief time
Powered by Blogger.

Search

Blogs I Visit

Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket

Blog Archive

Followers