Monday, May 31, 2021


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Alicia Mujica
Tube was purchased at her store HERE
PTU kit by Karmalized Scraps
Kit can be purchased at CDO HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open frame 2 and place to center
Apply paper of choice under frame
Apply element 29 under frame
Place tube to canvas and start building tag

Use any elements of choice. I used the following:
Element 1
Element 2
Element 3
Element 4
Element 10
Element 11
Element 12
Element 19
Element 21
Element 24
Element 25
Element 28
Spray 1&3
WordArt

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 31,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental







This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Very Many
Tube was purchased at their store HERE
PTU kit by Happy Pumpkin Studio called Melon Fantasy
Kit purchased from PFD HERE
Template 872 by Millie HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate and close original
Increase canvas to 700x700
I deleted all my layers except 1,2 &3
Click on layers 2&3
Select all, selctions float, selections defloat
Open paper 13 and paste as new layer
Move paper around so light side is inside marching dots
Selections invert delete
Open tube and paste inside each template layer
Resize tube to fit inside template
Select all, selections float, selections defloat
When tube is where you desire
Selections invert delete
Effects Xero Filter Radiance with settings of choice
Look to right on your PSP for layers (I still use 7)
Change blend mode to Screen
After this is completed I made a border around the template
On template 1 use any paper from kit and add same border

Place tube to left and start building tag
Use any elements of choice. I used the following:
Element 1
Element 15
Element 16
Element 17
Element 47
Element 52
Element 62
Element 68
Element 73
Element 76
Element 83
Element 91
Element 94
Element 105
Frame 4

Open element 20 and paste to back
Using MuraMeister Copies Encircle plugin make frame

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 14,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental







This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Tube was purchased at their store HERE
PTU kit by Dreaming With Bella called Enjoying Life
Kit can be purchased at her store HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Place tube to canvas and start building tag

Use any elements of choice. I used the following:
Element 1
Element 38
Element 44
Element 45
Element 48
Element 52
Element 59
Element 64
Element 66
Element 75
Element 79
Element 80
Element 87
Element 88
Element 90
Element 100
Element 103
Element 106
Element 109
Element 125
Element 128
Element 131
Element 138
Element 140
Element 141
Element 144
Element 146
Element 149

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 28,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental







This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Laguna
Tube was purchased at PFD HERE
PTU kit by Designz By Anorie called Butterfly Queen
Kit can also be purchased at one of her stores HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open element 72 and place to center
Place tube to canvas and start building tag

Use any elements of choice. I used the following:
Element 2
Element 3
Element 5
Element 7
Element 10
Element 12
Element 18
Element 20
Element 31
Element 37
Element 40
Element 43
Element 44
Element 45
Element 47
Element 57
Element 58
Element 61
Element 71

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 30,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental







This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Attila
Tube was included in kit when purchased
PTU kit by Dreaming With Bella called Enjoying Garden
Kit can be purchased at her store HERE
Make sure you sign-up for newsletter so you can catch her great deals!!!!!!!!!!
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Place tube and start building tag

Use any elements of choice. I used the following:
Element 2
Element 3
Element 4
Element 9
Element 11
Element 13
Element 14
Element 16
Element 18
Element 19
Element 24
Element 27
Element 29
Element 31
Element 39
Element 40
Element 46
Element 108
Element 122
Element 131
Element 136
Element 137
Element 152
Element 153

Merge layers and add mask of choice
I added a mask then used mask 1 from kit on top

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 25,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental







This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Alehandra_Vanhek
Tube was purchased at PFD HERE
PTU Apple Cluster Blossom set by Raspberry Road Design
Cluster set can be purchased at the store HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Place tube to canvas
Open all clusters from set and resize 20%
You will need to resize more when used on tag
Place clusters as desired on tag

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 27,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental





Saturday, May 29, 2021
 



 
Made this set for a friend at TTL
I can't teach how to make the full set - still learning
I got the templates from sylvie blog HERE
 
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Elias Chatzoudis
Tube was purchased at CDO HERE
PTU kit by Gimptastic called Life Happems Chocolate Helps
Kit can also be purchased at CDO HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open frame 1 and place to center
Add paper of choice under frame
Place tube to canvas and start building tag

Use any elements of choice. I used the following:
Element 1
Element 2
Element 3
Element 4
Element 6
Element 7
Element 8
Element 9
Element 12
Element 13
Element 14
Element 17
Element 18
Element 19
Element 20
Element 21
Element 22
Word Art

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 29,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental







This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Angelica S
Tube was included in this kit
FTU kit by Designz By Shelly HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open frames 1&2 and place on top of each other
Click inside with magic wand and expand by 15
Add new layer under frames and paste paper of choice
Place tube to canvas and start building tag

Use any elements of choice. I used the following:
Element 7
Element 8
Element 9
Element 37
Element 39
Element 40
Element 107
Element 112
Element 115

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 29,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental





Friday, May 28, 2021


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Misticheskaya
Tube was purchased at PFD HERE
FTU kit by Designz By Shelly HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open element 22 and place to center
Place tube to canvas and start building tag

Use any elements of choice. I used the following:
Element 20
Element 21
Element 23
Element 24
Element 37
Element 75
Element 81
Element 84
Element 96
Element 97
Element 104
Element 107
Element 113

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 28,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental





Thursday, May 27, 2021


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Tube was purchased at their store HERE
FTU kit by Angels Design HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open element 98 and place to center (resize)
Place tube to canvas and start building tag

Use any elements of choice. I used the following:
Element 4
Element 40
Element 63
Element 64
Element 71
Element 77
Element 79
Element 80
Element 84
Element 85
Element 87
Element 90
Element 94
Element 108
Element 109
Element 111

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 27,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental







This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Alicia Mujica
Tube was purchased at store HERE
FTU kit by Irish Princess Designs HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open element 16 and place to center
Using freehand tool drw around frame
Open new layer under frame
Select paper and paste into selection
Place tube to canvas and start building tag

Use any elements of choice. I used the following:
Element 1
Element 3
Element 4
Element 5
Element 15
Element 21
Element 25
Element 26
Element 28
Element 33
Element 34
Element 37
Element 38

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 27,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental





Tuesday, May 25, 2021




This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Tube was purchased at their store HERE
FTU kit by Mythical Designz HERE
I also used Cluster frame which is posted on thread
Word Art by by Kissing Kate HERE
Mask #2 from kit

Ok Lets get Started:
Open blank canvas 700x700
Copy and paste cluster into canvas and resize
Place tube and start building tag

Use any elements of choice. I used the following:
Element 2
Element 16
Element 18
Element 25

Merge layers and apply mask

For the animation I duplicated element2 3x's
Close off the duplicated layers
Apply VM Natural Sparkle filter with settings of choice
Close off original layer and open first duplicated
Apply same settings but change random size
Close off that layer and repeat to last duplicated layer
Now close off duplicated layers leaving original open
Merge layers and paste as new in animation
Go back to PSP, close off original layer and open first duplicated
Merge layers and paste as new in animation
Repeat again with last duplicated layer
Back in animation you should have 3 layers
Select all layers
View animation and save

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 25,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental





Monday, May 24, 2021


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Ray
Tube was purchased at PFD HERE
FTU kit GOF called Fantasy Tale HERE
Mask #178 & 188 by Mizteequee HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open elements 19 & 24
Place elements to right & left of canvas
Place tube and start building tag

Use any elements of choice. I used the following:
Element 1
Element 7
Element 11
Element 12
Element 13
Element 21
Element 39
Element 45
Element 52
Element 72
Element 73
Element 89
Element 90
Element 97
Element 112
Element 126
Element 136
Element 138
Element 157

Merge layers and add mask of choice
I used the 2 different masks with same paper

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 24,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental







This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Tube was purchased at VM Tubes HERE
PTU kit by Tiny Turtle called Fairy Garden
Kit can be purchased at her store HERE
Word Art by Chantal Corner HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Place tube and start building tag

Use any elements of choice. I used the following:
Element 14
Element 29
Element 35
Element 40
Element 43
Element 50
Element 62
Element 80
Element 81
Element 82
Element 87
Element 93
Element 98
Element 106
Element 115

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 24,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental







This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Alehandra_Vanhek
Tube was purchased at PFD HERE
FTU kit by Jens Sweet Temptations HERE
This was part of the TTL Plunder Island Blog Train
Check out all the other links for freebies
Mask #334 by Zombie Graphics HERE

Ok Lets get Started:
Open blank canvas 700x700
Open element 11 to center
Resize to 34%
Usinr MuraMeister Copies filter choose Encircle
Use settings fo choice to make cluster
Place tube and start building tag

Use any elements of choice. I used the following:
Element 2
Element 10
Element 23
Element 24
Element 29
Element 39
Element 45
Element 48
Element 49

Merge layers and add mask of choice
I used the blue paper for background mask
Then I used a dark paper for mask and moved above frame

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 23,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental







This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of StellaFelice7
Tube was purchased at PFD HERE
FTU kit by Linda's Creations called Strawberry Garden HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Place element 21 to center
Place tube and start building tag

Use any elements of choice. I used the following:
Element 1
Element 2
Element 3
Element 12
Element 13
Element 15
Element 17
Element 18
Element 26
Element 38
Element 45
Element 55
Element 62
Element 63
Element 66

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 23,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental







This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Fiodorova Maria
Tube was purchased at PFD HERE
FTU kit by Chichi Designz called Purple Passion HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open birdhouse & place to center
Place tube and start building tag

Use any elements of choice. I used the following:
Abstract
Balloon
Bird
Branch
Butterfly
Flower 3
Flower Bow
Flowers
Grass
Mask
Scattered Flowers
Sparkles
Sparkles 1
Sparkles Trail
String
White Flower

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 23,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental





Saturday, May 22, 2021


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Maryline Cazenave
Tube was purchased at CDO HERE
Exclusive PTU kit by Karmalized Scraps called Strawberry
Kit can be ONLY be purchased at Barbara Jensen Store HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open 2, resize & place to center
Rotate to left a little using deform tool
Place tube and start building tag

Use any elements of choice. I used the following:
Element 1
Element 13
Element 14
Element 15
Element 20
Element 21
Element 27
Element 29
Element 32
Element 33
Element 35
Element 36
Element 39
Element 40
Element 41
Element 44
Element 45

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 22,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental







This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Maryline Cazenave
Tube was purchased at CDO HERE
FTU kit by Chichiz Designz called Secret Garden HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open window, resize & place to right
Place tube and start building tag

Use any elements of choice. I used the following:
Bird
Bird 1
Birdhouse
Books
Branches
Branch Ribbon
Butterfly
Cloud
Flower Branch
Flower Branch 1
Flower Branch Ribbon
Flower Pots
Flowers 2&3
Fountain
Grass
Lantern
Lights
Pearls Sparkle
Sparkle Trail
Tree
Wooden Bench

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 22,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental







This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Tube was purchased at their store HERE
PTU kit by Bella Caribena called Steampunk Style - 53
I also purchased Embellishments 6&8 and Cluster Frame 6 packs
Kit can be purchased at her store HERE
Mask of choice

Ok Lets get Started:
Open CF 1B - shift D to duplicate & close original
Resize to your desired size
I used emb 1&2 from pack 8 and 5A from pack 6
Place tube and start building tag

Use any elements of choice. I used the following:
From the kit I used different sparkles to complete tag

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 22,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental







This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Ellie Milk
Exclusive tube was purchased at PFD HERE
PTU kit by Designz By Anorie called Queen
Kit can be purchased at  one of her stores HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open element 11, resize & place to center
Rotate to right a little using deform tool
Click inside with magik wand and expand by 10
Open new layer layer under frame keeping selection
Open paper of choice and paste into selection
Open element 97 and place to top
Place tube and start building tag

Use any elements of choice. I used the following:
Element 4
Element 10
Element 12
Element 13
Element  21
Element 22
Element 30
Element 37
Element 38
Element 39
Element 43
Element 61
Element 63

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 22,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental





Wednesday, May 19, 2021


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Misticheskaya
Tube was purchased at PFD HERE
FTU Mini Kit  #4 by Karmalized Scraps HERE
Mask #343 by Mizteeque HERE

Ok Lets get Started:
Open blank canvas 700x700
Place tube and start building tag

Use any elements of choice. I used the following:
Element 3
Element 5
Element 6
Element 8
Element 9
Element 11
Element 16
Element 17
Element 18
Element 19
Element 22
Element 23
Element 29
Spray 1&2
Water

Merge layers and add mask of choice
I used papers 3&4 with mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 19,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental







This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Fiodorova_Maria
Tube was purchased at VMArtists HERE
PTU kit by Doodles By Design called Making Art
Kit can be purchased at her store HERE
Template #903 by Millie's PSP Madness HERE
No mask used

Ok Lets get Started:
Open template - shift D to duplicate - close original
I deleted layers 11-15
Use papers from kit on template layers
Place tube and start building tag

Use any elements of choice. I used the following:
Element 1
Element 3
Element 5
Element 13
Element 22
Element 23
Element 39
Element 52
Element 56
Element 61
Element 67
Element 68
Element 123
Element 133
Element 149
Word Art 2

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 19,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental





Tuesday, May 18, 2021


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Misticheskaya
Exclusive tube was purchased at PFD HERE
PTU kit by Purple Dreams Scrap called Coffee Break
Kit can be purchased at PFD  HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open element 78, resize & place to center
Click inside frame with magik wand and expand by 10
Open new layer layer under frame keeping selection
Open paper of choice and paste into selection
Place tube and start building tag

Use any elements of choice. I used the following:
Element 3
Element 10
Element 14
Element 40
Element 43
Element 66
Element 71
Element 72
Element 73
Element 89
Element 90
Element 91
Element 95
Element 99

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 18,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental





Monday, May 17, 2021


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Tube was purchased at their store HERE
FTU kit by Miggins HERE
WordArt by Just Like Candy Designs HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open element 1, resize & place to center
Use MuraMeister's Encircle filter
Create a cluster frame of desired size
Place tube and start building tag

Use any elements of choice. I used the following:
Element 2
Element 3
Element 4
Element 5
Element 6
Element 7
Element 8

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 17,2021 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental





Grab My Blinkie

tk-Rhondas-Designz-blinkie

About Me

Hello friends and welcome to my blog!!! My name is Rhonda and I live in South East Ga., little town called Lumber City. I have 2 sons, 2 DIL's and 3 grandchildren. I work in healthcare as an RN.

When not working, I enjoy playing in PSP. It has been my passion over 20 years. PSP is relaxing and takes my mind away from troubles of life. I enjoy writing tutorials on my downtime.

I am expanding my creations to frames, clusters, templates and hopefully masks. I have NEVER made a mask but I have the time to learn now and I am excited. These will be FTU, all I ask is please download from the blog and if you are in a group or forum please send others to my blog and DO NOT HOTLINK. I would love to see your creations and show them off.

If you need to contact me with any questions concerning my tutorials or creations, send me an email. I am aware some of my older tutorials have links that are no longer working due to designers closing their blog. This is beyond my control. I am unable to share anything which was not shareable before. I honor all designers TOU.

I CT For

I don't CT that much any longer but these are designers who allow me to use their kits as show-off's.
Photobucket
Photobucket
Photobucket

T.O.U.

All tutorials that are on my blog have been written by me. Any resemblance to another tag or tutorial is purely coincidental. Please do not copy and claim as your own. You are welcome to use these tutorials in any groups or forums but please link back to my blog. I would love to see any tag that is made using my tutorial. If you have any questions or concerns you can contact me at rsheath31549@yahoo.com.

Cluster Frames are Personal Use ONLY!!!! Please do not claim them as your own or rip them apart. You are welcome to use in forums or groups but please link back to blog. My TOU are included in the downloads. I would love to see any creations you make with my tuts or other creations. Send them to me and I will display them.

My goal for this blog is to make creations others can use and enjoy. I want to focus on being positive through difficult times. Show importance of accepting others, no judging, just respect. Showing kindness to others can change another's life, even for a brief time
Powered by Blogger.

Search

Blogs I Visit

Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket

Blog Archive

Followers