Sunday, April 29, 2018
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Cuddly Rigor Mortis
You must obtain a license to use at CDO HERE
FTU Scrapkit by Sweet as Honey Creationz HERE
Mask #2 by Rachel Designs HERE

Ok Lets get Started:
This is a very quick and easy tutorial

Open blank canvas 700x700
Open Frame 1 and place to center
Resize this frame about 110%
Paste frame again - merge these 2 frames as 1
Click inside frame with magic wand and expand by 10
Open new layer under frame
Open paper 3 and paste into selection

Place tube toright hand side

Add any elements you want from the kit
I used:
Bee 1
Bow 2
Butterfly 1&2
Fence with Grass
Flower 1,2,3
Flowerlight
Froggie
Starstrail

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 29,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Thursday, April 19, 2018
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlata_M
Which you must obtain a license to use at his store HERE
FTU Scrapkit by Jen from Sweet Temptations called "Summer"
You can download this awesome kit  on TTL blog HERE
Template #65 by Fired by Flamin HERE
Mask by Maria on TTL blog HERE

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize by 115
Canvas size 700x700
Delete copyright,leaves & text

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a color of choice from kit or tube
selection invert delete
select none delete the original
add noise

Place your tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Element 3
Element 9
Element 10
Element 11
Element 15
Element 19
Element 23
Element 25
Element 26

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 19,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Abrand Icle Flaminio
You must obtain a license to use from HERE
PTU matching kit from Honored Scraps HERE
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open frame 1 and place in center
Click inside frame with magic wand and expand by 10
Add new layer under frame
Open paper of choice and paste into selection
Select none

Add other elements from kit to your tag
I used the following:
Element 10
Element 20

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 19,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Tuesday, April 17, 2018
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Kajenna
You can purchase this tube at PFD HERE
FTU scrapkit by HorsePlay's Pasture HERE
Scroll down page to Good Day For Ducks
Mask of choice

Resize elements to your liking

Ok Lets get Started:
Open a blank 700x700 image
Open element 26 and place in center
Add new layer under frame
Select all
Open paper 3 and paste into selection

Place your tube

Now add any other elements of choice
I used the following:
Element 2
Element 4
Element 14
Element 38
Element 40
Element 58
Element 60
Element 64
Element 66

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 17,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Monday, April 16, 2018
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Nocturne
You can purchase this work at PFD HERE
FTU Scrapkit by Toxic Desirez HERE
Collab also with MadeByJustin HERE
Template #820 by Millie HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Increase template to 700x700
Deleted copyright

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4 from Kristin's kit
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4 from Justin's kit
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1 from Justin's kit
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a close up of tube to right hand side - leave color as is
selection invert delete
select none delete the original
apply Luminance (Legacy)

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1 from Kristin's kit
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste black to rectangle
paste a close up of tube to left hand side
selection invert delete
select none delete the original
apply Luminance (Legacy)

Leave dots white

Decorate word art to your liking

Place your tube to center of tag
Xero Radiance if desired

Now time to add our elements
I used the following:
Bow 1 from Kristin
Candy from Justin
Music Scatter1 from Justin
Skull from Kristin
Curled ribbon 2 from Justin
Splatter from Kristin

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 16,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Misticheskaya
Which you must obtain a license to use at PFD HERE
PTU Scrapkit by PurpleDreams Scraps called "Wedding Day"
You can purchase this awesome kit HERE
Template #99 by Scrap Rebellion HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Delete copyright

I added border to my layers with noise

Click on layer 5 & copy of 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 6 & copy of 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on layer 3 & copy of 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on layer 4 & copy of 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Place your main tube
Xero radiance with settings of choice

Now time to add our elements
I used the following:
Element 20
Element 37
Element 51
Element 57
Element 58
Element 61
Element 62
Element 64
Element 65

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 15,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Saturday, April 14, 2018
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Vadis
You must obtain a license to use at PFD HERE
PTU Scrapkit by Tiny Turtle called Spring Road HERE
Template #15 by Jewel HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Increase canvas size 700x700
Delete copyright & word art

Click on layer 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper25
selection invert delete
select none delete the original

Click on layers 3  selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper28
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper29
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original

Place your tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Element 8
Element 14
Element 44
Element 51
Element 59
Element 76
Element 77
Element 90
Element 98
Element 101
Element 118

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 14,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of The Hunter
Which you must obtain a license to use at ACF HERE
PTU Scrapkit by Moonshine Dezinez called Gang GirlHERE
Template #10 by Creating with Millie HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Increase canvas size 700x700
Delete copyright & layers 10,11,14

Click on layer 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original

Click on layers 3&4  selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on layer 5&6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on layer 8&9 selections,select all, float,defloat
paste several close-ups of tube you are using
selection invert delete
select none delete original
apply xero porcelin to tubes

On word art recolor to your liking

Place your tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Element 3
Element 4
Element 11
Element 17
Element 19
Element 20
Element 38
Element 49

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 14,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Which you must obtain a license to use HERE
PTU Scrapkit by PinkParadox Productions HERE
Template #3 by Bookworm Designz HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original

I left my word art as it was and added a border

Place your tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Element 1
Element 2
Element 4
Element 5
Element 6
Element 9
Element 10
Element 11
Element 13
Element 14
Element 15
Element 20
Element 21
Element 27

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 6,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlata_M
You can purchase her tubes HERE
PTU Scrap Kit by PurpleDream Scraps called Spring Harmony  HERE
Mask of choice

Ok Lets get Started:
Open a blank image 700x700
Open  frame 4 and place as a new image
Grab the magik wand and click inside frame
Select modify expand by 10
Open paper 1 and place as a new layer
selections invert - delete
Move paper under frame
Open frame 2 and place on top of other frame
(You will ned to use the deform tool to fit around frame)

Place your tube
Xero Radiance with settings of choice

Now add any elements of choice
I used the following:
Element 1
Element 3
Element 43
Element 46
Element 48
Element 49
Element 51
Element 56
Element 60
Element 61
Element 72

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 14,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Yuki
Which you must obtain a license to use HERE
FTU Scrapkit by sylly creationz HERE
Template #833 by Millie HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template to your desired size
Delete copyright & layers 8&9

Click on layer 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layers 3&4  selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on layer 5&6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Place your tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Bow 1
Flowers 1&2
Flower Bunch 1&2
Flowers 1,2,3,4,7&10
Puppy 1
Tulips 1
Vase

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on April 14,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Grab My Blinkie

tk-Rhondas-Designz-blinkie

About Me

Hello friends and welcome to my blog!!! My name is Rhonda and I live in South East Ga., little town called Lumber City. I have 2 sons, 2 DIL's and 3 grandchildren. I work in healthcare as an RN.

When not working, I enjoy playing in PSP. It has been my passion over 20 years. PSP is relaxing and takes my mind away from troubles of life. I enjoy writing tutorials on my downtime.

I am expanding my creations to frames, clusters, templates and hopefully masks. I have NEVER made a mask but I have the time to learn now and I am excited. These will be FTU, all I ask is please download from the blog and if you are in a group or forum please send others to my blog and DO NOT HOTLINK. I would love to see your creations and show them off.

If you need to contact me with any questions concerning my tutorials or creations, send me an email. I am aware some of my older tutorials have links that are no longer working due to designers closing their blog. This is beyond my control. I am unable to share anything which was not shareable before. I honor all designers TOU.

I CT For

I don't CT that much any longer but these are designers who allow me to use their kits as show-off's.
Photobucket
Photobucket
Photobucket

T.O.U.

All tutorials that are on my blog have been written by me. Any resemblance to another tag or tutorial is purely coincidental. Please do not copy and claim as your own. You are welcome to use these tutorials in any groups or forums but please link back to my blog. I would love to see any tag that is made using my tutorial. If you have any questions or concerns you can contact me at rsheath31549@yahoo.com.

Cluster Frames are Personal Use ONLY!!!! Please do not claim them as your own or rip them apart. You are welcome to use in forums or groups but please link back to blog. My TOU are included in the downloads. I would love to see any creations you make with my tuts or other creations. Send them to me and I will display them.

My goal for this blog is to make creations others can use and enjoy. I want to focus on being positive through difficult times. Show importance of accepting others, no judging, just respect. Showing kindness to others can change another's life, even for a brief time
Powered by Blogger.

Search

Blogs I Visit

Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket

Blog Archive

Followers