This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlata_M
Which you must obtain a license to use HERE
PTU Scrapkit by Designz by Anorie called "Strawberry
You can purchase this awesome kit also from S&CO HERE
Template #94 by Scrap Rebellion HERE
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700 (I increase the size of layers by 108)
Delete copyright & white frame
Click on red rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
Click on top white square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Click on bottom white square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
Click on black circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
Click on white circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
Click on red circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
Now time to add our elements
I used the following:
Element 3
Element 5
Element 6
Element 10
Element 19
Element 26
Element 50
Element 60
Element 61
Element 66
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 30,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlata_M
Which you must obtain a license to use HERE
PTU Scrap Kit by Jens Sweet Temptations HERE
Template #219 by HorsePlayPasture HERE
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright, layer 7 & circle layers
Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
Click on layer 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
Click on layer 10,11&13 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
Click on layer 12&14 selections,select all, float,defloat
add new layer and flood fill with color of choice
selection invert delete
select none delete the original
Place your main tube
Xero Radiance with settings of choice
Now time to add our elements
I used the following:
Element 1
Element 3
Element 11
Element 13
Element 26
Element 34
Element 37
Element 39
Element 40
Element 46
Element 51
Element 56
Element 57
Element 58
Element 63
Element 64
Element 70
Element 76
Element 77
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 29,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zindy Zone
You must obtain a license to use this art HERE
PTU Scrap Kit from Bibi called "Rayas"
Kit can be purchased at S&CO HERE
Mask of choice
Word Art of choice
Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial
Open blank canvas 700x700
Open element 9 & place in center of tag
Grab the magic wand & click inside frame
Selections modify expand by 10
Open paper 6 and paste as new layer
Move paper under frame
Place your main tube & build around it
Now time to add our elements
I used the following:
Element 3
Element 6
Element 17
Element 32
Element 76
Element 80
Element 99
Element 100
Merge layers
Open paper 5 and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 28,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Stella
Which you must obtain a license to use HERE
FTU Scrapkit by Toxic Desirez called Summer Sweetness HERE
Template #603 by Millie HERE
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
add border with noise
Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
add border with noise
Click on layer 3&4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
add border with noise
Click on layer 5&6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
add border with noise
Click on layer 7&8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
add border with noise
I added gradient glow to my word art
Place your tube where desired
Now time to add our elements
I used the following:
Ribbon
Sparkles
Splatter
Sun
Surfboard
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 28,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
TY to everyone that sends me the results from my tutorials
I have been a little slow writing new tutorials
My job has been really crazy past 1 to 2 months
Hopefully I can get back to posting soon
Tag made using kit by Purple Dreams Scraps
Kit can be purchased HERE
Tag was created with PTU kit by Jens Sweet Temptation
Kit can be purchased at one of her stores HERE
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Alex Prihodko
You must obtain a license to use this art HERE
FTU Scrapkit from Melissaz Creationz HERE
Template #1 from Millie HERE
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
Click on layer 3 selections,select all, float,defloat
add new layer and flood fill with color from tube
select none delete the original
Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
Click on layer 6 selections,select all, float,defloat
add new layer and flood fill with 2 colors from tube
select none delete the original
Click on layer 7 selections,select all, float,defloat
add new layer and flood fill with color from tube
select none delete the original
Click on layers 8,9&10 selections,select all, float,defloat
add close-up of tube inside squares
apply Xero Radiance & Porcelin to tube
apply PhotoEffex to tubes
add border with noise to all
Place your tube
Now time to add our elements
I used the following:
Element 10
Element 16
Element 30
Element 31
Element 32
Element 33
Merge your layers
Open paper of choice & apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 14,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You can purchase these tubes HERE
PTU Scrapkit by PinkParadox Productions HERE
Mask of choice
Ok Lets get Started:
Open a blank image 700x700
Open frame 1 and place as a new image
Open frame 6 and place on top (see my tag for example)
Grab the magik wand and click inside frame
Select modify expand by 15
Add new layer under frames
Open paper 23 and plaste into selection
Selections delete
Place your tube
Xero Radiance with settings of choice
Now add any elements of choice
I used the following:
Element 17
Element 31
Element 44
Element 48
Element 84
Element 92
Element 112
Element 118
Element 127
Element 128
Element 130
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 13,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Anna Liwanag
I purchased the tube from CDO HERE
PTU Scrapkit by Tammy's Welt called Morning Spring
Can be purchased at PFD HERE
Template #372 by Missy HERE
Bulk download is to left of blog
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template to your liking
Deleted copyright, word art, dotted lines
Click on small circles x2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
Click on shape 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
Click on square 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
On brush layer reduce oapcity to 42
Click on circle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
Click on circle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
Click on dotted circle - I used dark blue
Click on rectangle back and recolor light blue then add noise
Click on rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
Place your tube to middle of tag
Now time to add our elements
I used the following:
Element 2
Element 7
Element 20
Element 22
Element 24
Element 25
Element 26
Element 27
Element 46
Element 47
Element 49
Element 50
Element 51
Element 68
Element 70
Element 73
Element 79
Element 84
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 13,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of PinUp Toons
Which you must obtain a license to use HERE
PTU Scrapkit by Designz By Anorie called "Ladybug Love"
You can purchase this awesome kit at one of her stores HERE
Template #178 by HorsePlay's Pasture HERE
Mask #5 by Allison's Addictions HERE
Ok lets get started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
add border with noise
Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
add border with noise
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
Click on layers 4,6,8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
Place your tube
Xero Radiance with settings of choice
Now time to add our elements
I used the following:
Element 6
Element 8
Element 9
Element 10
Element 11
Element 13
Element 21
Element 22
Element 24
Element 28
Element 31
Element 54
Element 75
Element 78
Element 87
Element 90
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 10,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Fiodorova Maria
You must obtain a license to use from PFD HERE
FTU Scrapkit from Bits N Bobs HERE
Template #12 by Carrie's Concoctions HERE
Mask by Lori's PSP Graphics HERE
Ok Lets get Started:
Open template - Shift D to duplicate and close original
Increase canvas size to 700x700
Resize layers to your size
Delete copyright
Resize elements and papers to your liking
Click on TR1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
add border with noise
Click on SC1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
add border with noise
Click on LR1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
add border with noise
Place your tube
Xero Radiance with settings of choice
Now time to add our elements
I used the following:
Element 2
Element 5
Element 6
Element 7
Element 8
Element 9
Element 10
Element 11
Element 12
Element 13
Element 17
Element 18
Element 20
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 9,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Lia
You can find these cute FTU tubes HERE
FTU Scrapkit from Linda's Creations HERE
Mask of choice
Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial
Move the elements around to create your tag
Open blank canvas 700x700
Place your tube & build around it
Now time to add our elements
I used the following:
Elements 2
Elements 3
Elements 12
Elements 13
Elements 14
Elements 17
Elements 21
Elements 33
Elements 38
Elements 41
Elements 53
Elements 62
Elements 63
Elements 66
Merge layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 7,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Juri Ueda
Find all her tubes HERE
PTU Scrapkit by Disturbed Scrap called "Snow Day"
Kit can be purhased at SNCO HERE
Mask of choice
Ok Lets get Started:
Open blank canvas 700x700
Open element 66 and place to center
I rotated mine a little to the left
Click inside frame - Select modify expand by 15
Create new layer and place under frame
Open paper 7 and place into selection
Select none
Place tube of choice
Now time to add our elements
I used the following:
Element 4
Element 5
Element 6
Element 8
Element 10
Element 11
Element 18
Element 27
Element 28
Element 39
Element 40
Element 45
Element 77
I created my own word art
Merge your layers
Open paper of choice & apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 7,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of StellaFelice7
You can purchase these tubes at PFD HERE
FTU Scrapkit by Rissa's Design called Sexy Summer HERE
Mask of choice
Ok Lets get Started:
Open a blank image 700x700
Open frame and place as a new image
Grab the magik wand and click inside frame
Select modify expand by 10
Add new layer under frame
Open paper 10 and paste into selection
Select none
Place your tube
Xero Radiance with settings of choice
Now add any elements of choice
I used the following:
Bad Girl Bottle
Beach Ball
Bubbles
Butterfly 5
Cellphone
Coconuts
Flowers
Frame 3
Palm Tree
Pink Drink
Sparkles
Splat 1&3
Star Frame
Summer Lovin WordArt
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 6,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You must obtain a license to use HERE
PTU Scrapkit by Designz By Anorie called "American"
You can purchase this kit at one of her stores HERE
Template #169 by Dangerously Delicious Designz HERE
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
I resized my template by 93% all layers
Canvas size 700x700
Delete copyright, blue star, creme circle, diamond circle, red stars
Click on dark blue square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
Click on dash-dot square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper
selection invert delete
select none delete the original
I added gradient glow
Click on brown square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
Click on red rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Click on dark blue strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
Click on light blue strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
Click on white strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
Click on blue squares selections,select all, float,defloat
add new layer and flood fill with white
select none delete the original
add noise with settings of your choice
Click on creme squares selections,select all, float,defloat
paste a close-up of tube inside both squares
selection invert delete
select none delete the original
apply Xero Radiance with settings of choice
I left the background color the same
Click on red squares selections,select all, float,defloat
add new layer and flood fill with red color
select none delete the original
Click on brown strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
Click on creme strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
Click on white circle
add more noise
Click on light blue circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
I left word art as is
Place your tube
Now time to add our elements
I used the following:
Element 9
Element 25
Element 28
Element 35
Element 66
Element 86
Merge your layers
Open paper of choice & apply mask if desired
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 2,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Pinup Toons
Which you must obtain a license to use at CDO HERE
FTU Scrapkit by Wicked Princess Scraps HERE
Mask of choice
Ok Lets get Started:
This is a very quick and easy tutorial
Resize elements to your liking
Open blank canvas 700x700
Open frame 2 place in center of tag
Open frame 3 and place on top
Grab the magic wand and click inside frame 3
Expand by 10
Add new layer under frame
Open paper 1 & paste into selections
I added word art inside my frame using pixel font & Mura's Meister filter
Place your tube
Now time to add our elements
I used the following:
Bow 1
Cupcake
Flower 3&4
Letter 1,2&3
Ribbon 2
Scatter
Shake
Swirl
Tag 1
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 1,2018 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental