photo spanishlove.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Alex Prihodko
You can purchase his work at PFD HERE
FTU Scrap Kit by Candy Treats HERE
Mask #41 by Gems HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Porcelin

Ok Lets get Started:
Open blank canvas 700x700
Open leaf frame 2 - resize 110%
Open leave frame 3 and place on top of other frame
Open heart frame 4 - resize 90 and move below 2nd frame
Merge these 3 frames as 1 layer
Open flower frame 3 and arrange to left side
Duplicate and move down
Merge these as 1
Duplicate and mirror
Open flower frame - resize 110%
Arrange below red flower frame
Repeat the same as red flower

Place closeup of tube in center of frames
Apply Xero Porcelin

Place main tube in front of frame
Repeat Porcelin

Now time to add any other elements
I used the following:
Button glitter 4
Bleeding love gem 2
Heart element 5
Leaves 2
Love Ribbon
Diamond
Flower Stem 1
Flower Stem 2
Flower Stem 3
Hair Clip 2

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 19,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
 photo rhondaSiggyApr2013.png
Saturday, October 18, 2014
 photo autumnsend.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
Which you must obtain a license to use HERE
PTU Scrap Kit by Chachaz Creations called Autumn Synfonie
You an purchase this awesome kit HERE
Mask #34 by Gems HERE
Don't forget to leave a thank you when downloading

This is a very simple & easy tutorial
Just place your elements where you want them

Open blank 700x700 canvas
Open element 45 and place in center
I used this element to build my tag

Now time to add our elements
I used the following:
Element 37
Element 39
Element 46
Element 47
Element 49
Element 50
Element 51
Element 52
Element 54
Element 56
Element 58
Element 59
Element 62
Element 65
Element 70

Merge your layers
Open paper 2 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 17,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
 photo thanksgivinginbloom_bibi.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Danny Lee
You must obtain a license to use his art at S&Co HERE
PTU Scrap Kit from Bibi called "Thanksgiving Night" HERE
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial
Open blank canvas 700x700
Open element 94 & place in center of tag
I used this element to build my tag

Place your main tube & build around it

Now time to add our elements
I used the following:
Element 1
Element 10
Element 18
Element 20
Element 22
Element 27
Element 28
Element 33
Element 36
Element 38
Element 39
Element 40
Element 42
Element 48
Element 74
Element 78
Element 82
Element 84
Element 85
Element 86
Element 112
Element 113

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 18,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Friday, October 17, 2014
 photo fingerfoodhalloween_sue.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Danny Lee
You must obtain a license to use his art at S&Co HERE
PTU Scrap Kit from Designz by Sue called "ABRACADABRA" HERE

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open element 51 & place in center of tag
Grab the magic wand & click inside frame
Selections modify expand by 10
Open paper 8 and paste as new layer
Move paper under frame

Place your main tube & build around it

Now time to add our elements
I used the following:
Element 3
Element 8
Element 10
Element 20
Element 23
Element 27
Element 28
Element 46
Element 58

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 17,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
 photo orangeandblakhalloween.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You can find his art HERE
FTU Scrap Kit by MMeliCrea Designz  HERE
This is a facebook freebie
Mask of choice
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open canvas size 700x700
Open frame 1 resize and place in center
Open frame 3 resize and place on top of frame 1
Click inside frame with magic wand
Selections modify expand by 8
Open new layer and move under frame
Open paper 5 and paste into selections
Select none

Place tube to left of tag

Now time to add our elements
I used the following:
Element 12
Element 13
Element 16
Element 17
Element 20
Element 26
Element 31
Element 48
Element 52
Element 57
Element 58
Element 60
Element 65

Merge your layers
Open paper 3 & apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 17,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Wednesday, October 15, 2014
 photo happyhalloweenbuddies.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
No tube needed for this tutorial
FTU Scrap Kit by Jen from Sweet Temptations called "Jeepers Creepers"
You can download this awesome kit HERE
Template by Freebie Friends HERE
Mask of choice
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright

Click on oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
I also added a border with noise

Change the color of the small text or leave as is

Click on strips selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on dotted rectangle selections,select all, float,defloat
paste a gradient of choice
selection invert delete
select none delete the original

Decorate the Happy Halloween text to your liking
I used a gradient with Filter Unliminted texture

Now time to add our elements
I used the following:
BFly 1
BFly 2
Boo
Cat
Frog
Goblet 2
Hat
Pumpkin 1
Pup

Merge your layers
Open paper 2 & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 15,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Tuesday, October 14, 2014
 photo boogiewitch.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Misticheskaya
You can purchase his tubes from PFD HERE
PTU kit by Jen from Sweet Temptations called "Halloween Boo-gie"
You can purchase this kit HERE
Cluster is included in kit
Mask of choice

Plugins:
Xero Porcelin

This is a very simple and easy tut
Just place your elements where you want them
Ok Lets get Started:

Open cluster 1 from kit - resize to your liking
Place your tube to left of tag

Add elements around the tube
Here are the ones I used:
Cupcake 2
Kitty

Merge your layers
Open paper 1 & apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 14,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Monday, October 13, 2014
 photo fallcutie_bibi.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Di-Halim
You must obtain a license to use this art at S&Co HERE
PTU Scrap Kit from Bibi called "Fall Cutie"
You an purchase this awesome kit at S&Co HERE
Template #211 from Toxic Desirez HERE

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 85%
Increase canvas to 700x700
Delete copyright & heart layers

Click on layer 8 & copy of 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on layer 6 & copy of 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 7 & copy of 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 3 & copy of 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on layer 5 & copy of 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on layer 9 & copy of 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
add new layer - Open element 129 and paste into selection
select none

Place your main tube

Now time to add our elements
I used the following:
Element 6
Element 7
Element 12
Element 18
Element 34
Element 41
Element 42
Element 47
Element 52
Element 72
Element 77
Element 80
Element 88
Element 92
Element 97
Element 99
Element 112
Element 115
Element 118
Element 124

Merge your layers

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 13,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Sunday, October 12, 2014
 photo zombiezone.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
No artist tube used
FTU Scrap Kit by Kittz Kreationz HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open elements B59 and place in center
Grab the magic wand and click inside frame
Selections modify expand by 10
Add new layer
Open paper 9
Paste paper into selections
Selections none
Move paper under frame

Now add any elements of your choice. I used the following:
B5
B11
B13
B16
B18
B22
B29
B30
B33
B40
B41
B48
B51

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 12,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Saturday, October 11, 2014
 photo battywitch.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of VeryMany
Which you must obtain a license to use HERE
PTU Scrap Kit by Chachaz Creations called Halloween Night
You an purchase this awesome kit at S&CO HERE
Template by StyleLicious HERE
Mask #0904 by Vix HERE
Mask is part of the set that is 416 to 426 
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright & wordart

Click on raster 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on raster 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on raster 3&4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on raster 5&6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on raster 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Place your main tube

Now time to add our elements
I used the following:
Element 3
Element 5
Element 6
Element 13
Element 16
Element 27
Element 29
Element 35
Element 44
Element 48
Element 49
Element 50
Element 53
Element 54
Element 58
Element 60

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 11,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
 photo blackandredbeauty.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlata
You must obtain a license to use HERE
PTU Scrap Kit from Kissing Kate called Dark and Luxurious HERE
This kit matches the tube!!!!!
Mask by Kisses N Dreams HERE

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial
Open blank canvas 700x700
Open frame 3 & place in center of tag
Grab the magic wand & click inside frame
Selections modify expand by 10
Open paper 4 and paste as new layer
Selections invert delete
Move paper under frame

Place your main tube & build around it

Now time to add our elements
I used the following:
Element 1
Element 2
Element 3
Element 4
Element 14
Element 16
Element 24
Element 25
Element 27
Element 30
Element 39
Element 66
Element 69

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 9,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
Saturday, October 4, 2014
 photo wiccawitch_joan.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Toriya
You must obtain a license to use his art at S&Co HERE
Matching PTU Scrapkit by Designs by Joan HERE
Mask of choice

Ok Lets get Started:
This is a very quick and easy tutorial
Open blank canvas 700x700
Open element 35 and place in center
Grab the magic wand & click inside frame
Selections modify expand by 10
Add new layer under frame
Open paper 1 & paste into selections

Place tube to bottom of tag

Add any other elements you want from the kit
I used:
Element 2
Element 3
Element 4
Element 5
Element 14
Element 37
Element 46
Element 48
Element 75
Element 78
Element 80
Element 115

Merge layers
Open paper 6 & apply mask of choice
Place your name where you like it

Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 4,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png
 photo bchope_bibi.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of GraphFreaks
You must obtain a license to use this art at S&Co HERE
PTU Scrap Kit from Bibi called "BCA Babe"
You an purchase this awesome kit at S&Co HERE
Template by Tamie HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template by 84% all layers
Increase canvas size to 700x700
delete copyright,wordart and rasters 5

Add noise to all frames and borders

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 2 & copy of layer selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on layer 1 & copy of layer selections,select all, float,defloat
paste a paper of choice from the kit - I used paper19
selection invert delete
select none delete the original

Place your main tube

Now time to add our elements
I used the following:
Element 4
Element 5
Element 16
Element 35
Element 37
Element 39
Element 40
Element 46
Element 47
Element 53
Element 77
Element 82
Element 89
Element 100
Element 101
Element 104
Element 116
Element 117
Element 125
Element 128

Merge your layers
Open paper 15 & apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 4,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Grab My Blinkie

tk-Rhondas-Designz-blinkie

About Me

Hello friends and welcome to my blog!!! My name is Rhonda and I live in South East Ga., little town called Lumber City. I have 2 sons, 2 DIL's and 3 grandchildren. I work in healthcare as an RN.

When not working, I enjoy playing in PSP. It has been my passion over 20 years. PSP is relaxing and takes my mind away from troubles of life. I enjoy writing tutorials on my downtime.

I am expanding my creations to frames, clusters, templates and hopefully masks. I have NEVER made a mask but I have the time to learn now and I am excited. These will be FTU, all I ask is please download from the blog and if you are in a group or forum please send others to my blog and DO NOT HOTLINK. I would love to see your creations and show them off.

If you need to contact me with any questions concerning my tutorials or creations, send me an email. I am aware some of my older tutorials have links that are no longer working due to designers closing their blog. This is beyond my control. I am unable to share anything which was not shareable before. I honor all designers TOU.

I CT For

I don't CT that much any longer but these are designers who allow me to use their kits as show-off's.
Photobucket
Photobucket
Photobucket

T.O.U.

All tutorials that are on my blog have been written by me. Any resemblance to another tag or tutorial is purely coincidental. Please do not copy and claim as your own. You are welcome to use these tutorials in any groups or forums but please link back to my blog. I would love to see any tag that is made using my tutorial. If you have any questions or concerns you can contact me at rsheath31549@yahoo.com.

Cluster Frames are Personal Use ONLY!!!! Please do not claim them as your own or rip them apart. You are welcome to use in forums or groups but please link back to blog. My TOU are included in the downloads. I would love to see any creations you make with my tuts or other creations. Send them to me and I will display them.

My goal for this blog is to make creations others can use and enjoy. I want to focus on being positive through difficult times. Show importance of accepting others, no judging, just respect. Showing kindness to others can change another's life, even for a brief time
Powered by Blogger.

Search

Blogs I Visit

Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket

Categories

Blog Archive

Followers