Pages

Wednesday, December 31, 2014

Santa Has Arrived - PTU

 photo santahasarrived.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You must obtain a license to use HERE
PTU Scrap Kit from Icy Blue Mystic Designs called Christmas Stocking
You can purchase this kit at one of her stores HERE
Mask of choice

Resize elements to your liking

This is a very quick and easy tutorial
Ok Lets get Started:
Open blank canvas 700x700
Open frame 4 and place in center
Click inside frame with magic wand
Selections modify expand by 12
Open new layer under frame
Open paper 10 and paste into selections
Select none

Place main tube

Now time to add our elements
I used the following:
Candle1
Christmas Gifts 1,2 &3
Christmas Tree 1
Cocktail Christmas 2
Puppy with candy cane
Santa and Sleigh

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 31,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Cheers to the New Year - PTU

 photo cheerstothenewyear_kelly.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of The Hunter
You must obtain a license to use this art at S&Co HERE
PTU Scrap Kit from Kizzed by Kelz called "New year Blues"
You an purchase this awesome kit at S&Co HERE
Template from Dangerously Delicious Designz HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright

Click on bottom and topred strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original

Click on green oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on white rounded rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on black toothed square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper18
selection invert delete
select none delete the original

Click on red square outline selections,select all, float,defloat
paste a paper of choice from the kit - I used paper27
selection invert delete
select none delete the original

Click on white square outline selections,select all, float,defloat
paste a paper of choice from the kit - I used paper24
selection invert delete
select none delete the original

Click on beige strips selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

recolor word art and glasses

Place your main tube

Now time to add our elements
I used the following:
Element 3
Element 4
Element 5
Element 26
Element 27
Element 39
Element 48
Element 68
Element 79
Element 90
Element 94
Element 97
Element 126
Element 127

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 31,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Romance at Midnight - PTU

 photo romanceatmidnight_bibi.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of The Hunter
You must obtain a license to use his art at S&Co HERE
Matching PTU Scrapkit by Bibi Collection HERE
Mask of choice

Resize elements to your liking

Ok Lets get Started:
This is a very quick and easy tutorial
Open element 64 & place in center
Grab the magic wand & click inside frame
Selections modify expand by 15
Add new layer under frame
Open paper 5 & paste into selections
Open element 71 and place on top of first frame

Place main tube to right of tag

Add any other elements you want from the kit
I used:
Element 4
Element 5
Element 6
Element 12
Element 13
Element 22
Element 32
Element 38
Element 59
Element 78
Element 127
Element 165
Element 168
Element 170
Element 172

Merge layers
Open paper 4 & apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 31,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Let's Celebrate - PTU

 photo letscelebrate_jen.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Which you must obtain a license to use HERE
PTU Scrap Kit by Jens Sweet Temptations called One Year
You an purchase this awesome kit HERE
Template by StyleLicious HERE
Mask by Dangerously Delicious HERE

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright & wordart

Click on raster 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on raster 4&5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on raster 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Place your main tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Bling 1
Bracket
Champagne Flute
Champagne
Fireworks 3
Flute
Hat 2
Lets Celebrate
Music
Party Cluster
Ticket
Wands

Merge your layers
Open glitter paper of choice and apply any mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 31,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Polar Bear Winter - PTU

 photo polarbearwinter_ana.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Danny Lee
You must obtain a license to use his art at S&Co HERE
Matching PTU Scrapkit by Lizquis Scraps HERE
Mask of choice

Resize elements to your liking

Ok Lets get Started:
This is a very quick and easy tutroial
Open frame 3 & place in center
Grab the magic wand & click inside frame
Selections modify expand by 25
Add new layer under frame
Open paper 2 & paste into selections

Place main tube to right of tag

Add any other elements you want from the kit
I used:
Bears
Boots
Branch 1
Flowers
House
Lamp
Penquin
Post Box
Snow 2
Snowflakes 1
Sparkles
Tree 2

Merge layers
Open paper 6 & apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 31,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Tuesday, December 30, 2014

Masked New Year - FTU

 photo maskednewyears.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Andy Cooper
You must obtain a license to use his art at S&Co HERE
FTU Scrapkit by Digicats HERE
Mask #8 by Chrissy Chaos HERE

Resize elements to your liking

Ok Lets get Started:
This is a very quick and easy tutorial
Open blank canvas 700x700
Open frame 9 and place in center
Open frame 7 and place on top
Grab the magic wand & click inside top frame
Selections modify expand by 10
Open paper 17 & paste as new layer
Selections invert delete
Move paper under frame

Place tube to center of tag

Add any other elements you want from the kit
I used the following:
Balloon 2
Champagne 1
Curly Bow
Fireworks 3
Flower 2
Metalic Flute
New Years Clock 1&3
Party Hat 1
Swizzle Stick
Tree 2

Merge layers
Open paper 19 & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 30,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Monday, December 29, 2014

A Time to Reflect - FTU


 photo atimetoreflect.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Keith Garvey
You can purchase his tubes HERE
FTU scrapkit by Distrubed Scraps HERE
Please leave some love when you download

Resize elements to your liking

Ok Lets get Started:
Open a blank 700x700 image
Open frame 064 and place in center
Using selection tool draw around frame
Add new layer under frame and paste into selection

Place your main tube
Apply Xero Radiance

Now add any other elements of choice
I used the following:
Element 10
Element 12
Element 20
Element 37
Element 45
Element 46
Element 52
Element 53
Element 66

Merge your layers

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 26,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
 photo rhondaSiggyApr2013.png

Sunday, December 28, 2014

Merry Christmas City Lights - FTU

 photo merrychristmascitylights.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You can purchase these tubes HERE
FTU Scrapkit by Toxic Desirez HERE
Please leave some love when you download

Ok Lets get Started:
Open canvas 700x700
Open frame 3 - resize 85%
Click inside frame with magic wand
Selections Modify Expand by 12
Add new layer under frame and paste paper 11 into selection
Open wreath and place to outside of frame on both sides
Open street lamp -resize 65% and place to far right of frame
Open sign 2 -resize 70% and place to left of frame
Open stocking - resize 52% and place to middle of frame toward the bottom
Open sign 1 - resize 60% and place to left of frame
Open Santa Bag - resize 58% and place to far right of frame
Open ornament 2 -resize 42% and place in front of sign 1
Open bottle - resize 30% and place beside ornament in front
Open ornament & kitty - resize 42% and place to right of ornament & in front of sign 1
Open candles - resize 52% and place to right of frame at bottom
Open bells - resize 45% and place in center of frame at top
I added some sparkles to my tag

Open tube of choice and place in front of Santa bag

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 17,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
 photo rhondaSiggyApr2013.png

Make Your Christmas - FTU

 photo makeyourchristmasjolly.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Scott Blair
Not sure if he is selling right now.
This tube was purchased at MPT which has closed
FTU Scrap Kit by Amy Marie HERE
Template by Candylicious Designz HERE
Mask by Ginny HERE
First mask on page
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 73%
Canvas size 700x700
Deleted copyright

Click on black circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on red rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original

Click on white circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on grey background selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
add noise

Click on green square left selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on green square right selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Place your main tube in center
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Element 1
Element 22
Bag
Candle 1
Candy 4
G4
Pine Snow
Snow Limb
Tree 2

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 23,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Christmas Day - FTU

 photo christmasday.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Which you must obtain a license to use at their store HERE
FTU Scrap Kit by AmyMarie called Christmas Day HERE
FTU Cluster by Chilipepper Spiced to match kit HERE
Mask #103 by Millie HERE

Ok Lets get Started:
Open cluster frame, shift D to duplicate and close original
Using the freehand tool draw around frame
Add new layer under frame - select all
Open paper 3 and paste into selection
Select none
Apply blinds effect with settings of your choice

Place tube where desired

Now let's add our elements to the tag
I used the following:
Candycane with bells
Christmas Bells
Element 1
Gift
M glass
Tree

Merge your layers
Open paper 8 & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 21,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Friday, December 12, 2014

Christmas Lilly - PTU

 photo christmaslilly_kelly.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Vi Nina
You must obtain a license to use this art at S&Co HERE
PTU Scrap Kit from Kizzed by Kelz called "Christmas Lilly"
You can purchase this awesome kit at S&Co HERE
Mask of choice

Ok Lets get Started:
This is a very quick and easy tutorial
Open element 38 & place to far right of canvas
Grab the magic wand & click inside frame
Selections modify expand by 12
Add new layer under frame
Selections select all
Open paper 4 & paste into selection
Select none

Place your main tube

Now time to add our elements
I used the following:
Element 15
Element 16
Element 23
Element 24
Element 41
Element 46
Element 47
Element 50
Element 59
Element 63
Element 66
Element 69
Element 74

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 11,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Icy Blue Christmas - PTU

 photo icybluechristmas.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Pinup Toons
You can find Pinup tubes at CDO HERE
PTU Scrap Kit by Icy Blue Mystic Designs "Blue Winter"
You can purchase this kit at one of her stores HERE
Template #0029 from Manipulated by Magik HERE
Use mask of choice
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template to your liking
delete copyright,wordart & lower right circle

Click on long rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original

Click on middle square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on left square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original

Click on mid left circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original

Click on lower left circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Place your tube

Now time to add our elements
I used the following:
Candy Cane 1
Flower 3
Holiday Hat
Holly Garland2
Pole 1
Puppy with Candy
Rudolph
Santa Sleigh1
Tree 1

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 12,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Sunday, December 7, 2014

Santa Hat - PTU

 photo santahat_andy.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Andy Cooper
You must obtain a license to use this art at S&Co HERE
PTU Scrap Kit from Lizquis Scraps called "Santa Hat"
You can purchase this awesome kit at S&Co HERE
Mask of choice

Ok Lets get Started:
This is a very quick and easy tutorial
Resize elements to your liking

Open blank 700x700 canvas
Open frame 3 & place in center of tag
Grab the magic wand & click inside frame
Selections modify expand by 10
Add new layer under frame
Open paper 6 & paste as new layer
Selections invert delete

Place your main tube

Now time to add our elements
I used the following:
Bell
Boot
Bottle
Candle
Candy Cane
Decor 1
Letter
Milk
Mouse
Ornaments
Presents
Sack
Tree

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 7,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Spreading Holiday Cheer - PTU

 photo spreadingholidaycheer.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Ismael Rac
Which you must obtain a license to use HERE
This tube is a freebie on his FB page. TY Xeracx!!!!!!!!!!!!!!!!!!!!
PTU Scrap Kit by Purple Dream Scraps called Santa Claus HERE
Template by K'lani Designs HERE
Mask by Chichidesignz2 HERE
Mask used is 3rd one down from top
Please leave a thank you when downloading freebies

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright,right square,left rectangle,circle frame & green dots

Click on left square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on right rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original

Place your tube

Now time to add our elements
I used the following:
Element 1
Element 8
Element 33
Element 37
Element 41
Element 44
Element 48
Element 58
Element 59
Element 60
Element 66

Merge your layers
Open paper 8 and apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 3,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Merry Christmas Pixie - FTU

 photo merrychristmaspixie.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You can purchase his tubes at Garv - Girls PSP HERE
The tube I am using was purchased at PTE which has closed.
Tube name is Christmas Pixie
FTU Scrap Kit by Teresa from Topcats Tagz HERE
Mask of choice
Don't forget to leave a thank you when downloading

Drop shadow layers to your liking

Ok Lets get Started:
Open blank canvas 700x700
Open element 48 from kit and paste in center
Take the freehand tool and draw around the wreath
Open paper 2 amd paste as new layer
Selections invert delete
Select none
Move paper under wreath
Place your main tube
I placed mine to the right of wreath
Open element 23 and place to bottom of wreath
Open element 15 - resize 68% and place behind wordart to the far right
Open element 16 - resixe 60% and place behind wordart to the far left
Open element 30 - resize 52% and place behind wordart beside present to the left
Open element 18 - resize and place behind present to far right
Merge these layers together
Open element 32 - click inside with magic wand and expand by 4
Open paper 3 and paste as new layer - selections invert delete - select none
Move paper under frame and merge these as one
Move this frame behind wreath up towards the top left
Duplicate this frame and move second frame to the right about half way down
Erase any parts of the frames showing under wordart

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 30,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Tuesday, December 2, 2014

Joy at Christmas - PTU

 photo Image1.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Barbara Jensen
You can purchase her work HERE
PTU Scrap Kit by Jen from Sweets Temptations called "Joy to the World"
You can purchase this kit HERE
Template #701 by Millie HERE
Mask of choice
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright, dotted lines & wordart

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on layer 3&4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
add new layer and flood fill with color of choice
select none delete the original

Click on layer 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on layer 10 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Place your main tube
Xero radiance with settings of choice

Now add any other elements of choice
I used the following:
Bell 1
Flower
Gift Bag
Gift Bag 1
Gifts 1,2,3&4
Kitty
Post
Sack
Scroll
Stocking
Tree 2

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on December 2,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Sunday, November 30, 2014

Countdown to Christmas Blog Train with The Taggers Lounge

 photo graphics-christmas-train-458123_zpsswmpxgtw.gif



 ChooChoo!!!!!

The Taggers Lounge Countdown to Christmas Blog Train has left the station!!!!
Come Join Us and Get Some Awesome Goodies!!!
I made a taggers size kit for this train
You can download my part HERE
 photo countdowntochristmaspreview.png

Be sure to stop at all the shops to get the goodies

Train Headquaters
Rhondas Rockin Designz
Redefined Designs
Designz by Anorie
Maria's Place
Charlieonline.it
Shelley's Siggys
LadyQueen's PSP Creations
Chantals Corner
Jens Sweet Temptations
Tags by Tika

Remember we are all on different time zones so check back again if their trip hasn't left the station. Hope you enjoy all the goodies we have for you.

If you aren't a member of The Taggers Lounge forum we would love to have you join.
New members accepted daily.
You can find the link at top of my blog


 photo rhondaSiggyApr2013.png

Saturday, November 29, 2014

Sleigh Bells Ring - FTU

 photo sleighbellsring.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Jennifer Janesko
You can purchase these tubes at CDO HERE
FTU kit by Candy's Treats HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open leaf frame 2 and paste as new layer
Grab the magic wand and click inside frame
Selections modify expand by 15
Drop down and add a new layer
Open paper 1 from freebie folder and paste into selection
Add tube of choice inside frame
Merge these layers as one
Open ct1Frame1 and place behind other frame
Apply glitter spill of choice between the 2 frames on both sides
Open butterfly flight, resize and place to top left of clusters
Duplicate this and mirror
Resize second butterfly again and place to right hand side
Open bells on string and place on top of stars in cluster
Open wordart 4 & place where you like
Add eyecandy gradient or some type of border

Apply mask of choice
Place your name where you like it

Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 21,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
 photo rhondaSiggyApr2013.png

Thankful Harvest - FTU

 photo thankfulharvest.png

Tube of choice: I'm using the wonderful art work of Pinup Toons
You can purchase these tubes at CDO HERE
FTU Scrap Kit by Dreamland Designs HERE
Template by StyleLicious HERE
Mask of choice
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Porcelin

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright and wordart

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original

Click on layer 2&4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper17
selection invert delete
select none delete the original
add noise

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
add noise

Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Place your main tube
apply Xero Porcelin with settings of choice

Now add any other elements of choice
I used the following:
Apple Barrel
Corn Stalk
Fall Flower Basket
Indian Corn
Pine Candle
Tree
Twined up Wood
Yellow Flower

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 29,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Monday, November 24, 2014

Show off from my tutorial

 photo mm111614rhonda-vi.png
 photo AngelicaSBlessedBe_Louise_zps859fdd72.png
 photo Melissa-ACBlessedJLG_zpse84dd593.png
 photo Rhonda_Feya_MM2014_zpsc2edfb82.png
 photo Rhonda_MystMast11-16_zps27a230c6.png
 photo AngelicaSBlessedLD-Rhonda_zpsddd11662.png

Over at The Taggers Lounge we have a weekly Mystery Tutorial Masterpiece Challange
My tutorial Blessed by Autumn was used this week
The members done a great job as always
Come on over and join us. You can find the link at the top of the blog photo rhondaSiggyApr2013.png

Apple Delight - FTU

 photo appledelight.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Arthur Crowe
You must obtain a license to use HERE
FTU Scrap Kit from Sinfully Creative Scraps HERE
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open frame 2
Click inside with magic wand & expand by 8
Open paper 6 and paste as new layer
Selections invert delete
Move paper under frame

Place your main tube & build around it

Now time to add our elements
I used the following:
Element 4
Element 5
Element 6
Element 7
Element 8
Element 9
Element 15
Element 17
Element 19
Element 23
Element 24
Element 26
Frame 1

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 24,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Turkey Pumpkin - FTU

 photo turkeypumpkin.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You must obtain a license to use HERE
FTU Scrap Kit from Icy Blue Mystic Designs HERE
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open Frame 3, resize and place in center
Click inside frame with magic wand
Expand by 8
Open paper 1 and paste as new layer
Selections invert
Move paper under frame

Place your main tube where desired

Now time to add our elements
I used the following:
Butterfly 1
Leaf Cluster 1
Leaf Cluster 2
PickAPumpkin
Turkey

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 24,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png