Sunday, November 19, 2023

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful artwork of Kajenna
Tube purchased at PFD HERE
FTU Kit by MizTeeques called Letter to Santa HERE
Check out all the great freebies!!!!!!!!!!
Mask #2 by Shelly at EFRB HERE
WA of choice

Ok let's get started:
Open blank canvas 725x725
Open element 65, resize & place to center
Open tube of choice & paste on tag

Use any elements of choice. I used the following:
Element 4
Element 5
Element 9
Element 19
Element 23
Element 35
Element 45
Element 48
Element 55
Element 60
Element 66
Element 67
Element 1

Merge layers or keep layers open to use later
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 19,2023 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Thursday, November 16, 2023
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful artwork of Kajenna
Tube purchased at PFD HERE
FTU kit by Designz by Shelly called Abundant Blessings HERE
First kit on page - check out rest of her freebies!!!!!!!!!!!
WA by Karmalized Scraps HERE
Mask #972 by Rachel Designs HERE

**Always remember to resharpen tubes after resizing, rotating
I may not post in tutorial thinking you are aware
Anything that distorts image needs to be sharpened
Also drop shadow each element, tube, image**

Ok let's get started:
Open blank canvas 725x725
Open element 105, resize and place to canvas near bottom
Open element 107, resize and place to canvas near top
Opem element 124, resize, rotate 90 to right and place to left side of canvas
Click inside with magic wand and expand by 10
Open paper of choice, I used pp18, add as new layer under frame
Selections delete. I then rotated my frame a little to left with deform tool
Open element 110, resize and place to canvas near top of frame
Layers duplicate, image mirror
Open element 119, resize and paste near top to right side
Open element 121, resize and paste to center, moving slightly to left
Open tube of choice & paste on tag

Use any elements of choice. I used the following:
Element 2
Element 4
Element 16
Element 24
Element 25
Element 27
Element 34
Element 39
Element 41
Element 42 (rotate)
Element 47
Element 57
Element 71
Element 72
Element 102
Element 115
Element 116
Element 118

Open paper of choice and apply mask
Merge layers or keep layers open to use later

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 16,2023 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Wednesday, November 15, 2023

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful artwork of Ellie_Milk
Exclusive tube purchased at PFD HERE
PTU kit by Jen from Jen's Sweet Temptations called Sunflower Power
Kit can be purchased HERE.
All kits 50% off at time of this posting
Mask of choice
WA of choice

Ok let's get started:
Open blank canvas 725x725
Open element 94 and place to center, resize if you choose.
Open element 12 and place to left side behind element 94 near top
Open element 14 and place to right side behind element 94 near bottom
Open tube of choice & paste on canvas

Use any elements of choice. I used the following:
Element 1
Element 4
Element 5
Element 9
Element 19
Element 20
Element 29
Element 50
Element 51
Element 62
Element 69
Element 82
Element 89
Element 90

Merge layers or keep layers open to use later
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 15,2023 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Sunday, November 12, 2023

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful artwork of Elias Chatzoudis
Tube was purchased at CDO HERE
PTU kit by Jens Sweet Temptations called Turkey Day
Kit can be purchased at her store HERE
Jen is having a 50% off sale at time of this posting
Mask #66 from Moonbeams & Spiderwebs HERE
Check out rest of the goodies offered on blog

Ok let's get started:
Open blank canvas 725x725
Open element 20 & place to center close to top 
Open tube of choice and place to left hand side

Use any elements from kit to complete your tag
I used the following:
Element 4
Element 5
Element 7
Element 9
Element 10
Element 12
Element 14
Element 23
Element 24
Element 26
Element 27
Element 29
Element 30
Element 36
Element 48
Element 55
Element 61

Open paper of choice & apply mask 
I leave all my layers open for future use

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 12,2023 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental


Wednesday, November 8, 2023
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful artwork of Fiodorava_Maria
Exclusive tube purchased at PFD HERE
FTU Kit by My Tagging Addiction HERE
Check out all Linda's freebies!!!!!!!!!!
Mask #5 by Wendez Watermark HERE
Last post on page - First set of zips
Check out the other masks and all freebies

Ok let's get started:
Open blank canvas 725x725
Open frame 5, resize
Click inside with magic wand & expand by 6 (keep selected)
Open new layer under frame
Open paper and paste into selection (deselect)
Open element 11 and resize 40%
Place behind original frame
Using Mura Meister Encircle filter, create a cluster in back
Use setting of your choice
Open tube of choice & paste on tag

Use any elements of choice. I used the following:
Element 1
Element 2
Element 4
Element 5
Element 9
Element 12
Element 15
Element 17
Element 19
Element 20
Element 23
Element 31
Element 32
Element 33

Merge layers or keep layers open to use later
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 8,2023 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Friday, November 3, 2023


This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful artwork of StellaFelice7
Tube was purchased at PFD HERE
FTU Kit by Designz By Shelly called Thanksgiving Blessings HERE
Thanksgiving Template #1 by Chantal's Corner on TTL Blog HERE
Mask of choice

Ok Lets get Started:
Open template Shift D to duplicate & close original 
Resize template to your choice
I delete layers 9-14
You can keep if you choose
Start at the bottom and work up
On each layer I added a border of 3 and trimmed in pp18
Layer 7 - pp15 
Layer 3 - pp14
Layer 6 - pp2
Layer 2 - pp5
Layer 5 - pp1
Layer 4 - pp3
Layer 8 - pp10

Use any elements of choice from kit
. I used the following:
Element 3
Element 4
Element 6
Element 21
Element 22
Element 25
Element 28
Element 31
Element 36
Element 37
Element 38
Element 40
Element 44
Element 50
Element 120

Keep layers open and add mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 3,2023 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

Grab My Blinkie

tk-Rhondas-Designz-blinkie

About Me

Hello friends and welcome to my blog!!! My name is Rhonda and I live in South East Ga., little town called Lumber City. I have 2 sons, 2 DIL's and 3 grandchildren. I work in healthcare as an RN.

When not working, I enjoy playing in PSP. It has been my passion over 20 years. PSP is relaxing and takes my mind away from troubles of life. I enjoy writing tutorials on my downtime.

I am expanding my creations to frames, clusters, templates and hopefully masks. I have NEVER made a mask but I have the time to learn now and I am excited. These will be FTU, all I ask is please download from the blog and if you are in a group or forum please send others to my blog and DO NOT HOTLINK. I would love to see your creations and show them off.

If you need to contact me with any questions concerning my tutorials or creations, send me an email. I am aware some of my older tutorials have links that are no longer working due to designers closing their blog. This is beyond my control. I am unable to share anything which was not shareable before. I honor all designers TOU.

I CT For

I don't CT that much any longer but these are designers who allow me to use their kits as show-off's.
Photobucket
Photobucket
Photobucket
Photobucket

T.O.U.

All tutorials that are on my blog have been written by me. Any resemblance to another tag or tutorial is purely coincidental. Please do not copy and claim as your own. You are welcome to use these tutorials in any groups or forums but please link back to my blog. I would love to see any tag that is made using my tutorial. If you have any questions or concerns you can contact me at rsheath31549@yahoo.com.

Cluster Frames are Personal Use ONLY!!!! Please do not claim them as your own or rip them apart. You are welcome to use in forums or groups but please link back to blog. My TOU are included in the downloads. I would love to see any creations you make with my tuts or other creations. Send them to me and I will display them.

My goal for this blog is to make creations others can use and enjoy. I want to focus on being positive through difficult times. Show importance of accepting others, no judging, just respect. Showing kindness to others can change another's life, even for a brief time
Powered by Blogger.

Search

Blogs I Visit

Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket
Photobucket

Blog Archive

Followers