Pages

Sunday, June 29, 2014

Soldier Brave & Strong - FTU

 photo soldiersbraveandstrong.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Michael Landefeld
These tubes were purchased at CILM which has closed
You can purchase these tubes now at CDO HERE
Cluster Frame by This-N-That HERE
Mask of choice

Ok Lets get Started:
Open cluster 1 - shift D to duplicate & close original
Increase canvas to 700x700
Grab the freehand tool and draw around frame
Add new layer and flood fill with gradient of choice
Select none
Move under frame
Apply Blinds effect with settings of choice
Add close up of tube inside frame

Add main tube to far left

Merge layers
Apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 29,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
 photo rhondaSiggyApr2013.png

Boom Boom - FTU

 photo boomboom.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Jessica Dougherty
This tube was purchased at CILM which has closed
You must obtain a license to use her art now at CDO HERE
FTU Scrap Kit by Montis HERE
Template HERE
Mask #351 by WSL HERE
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Deleted copyright,wordart & stars

Click on rectangle back selections,select all, float,defloat
add new layer & paste RWB paper into selection
select none delete the original

Click on all frames selections,select all, float,defloat
paste a paper of choice from the kit - I used paper20
selection invert delete
select none delete the original

Click on vertical bars selections,select all, float,defloat
paste a paper of choice from the kit - I used paper19
selection invert delete
select none delete the original

Click on circle back ground selections,select all, float,defloat
add new layer & paste paper17 into selection
select none delete the original

Place your main tube in center
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Butterfly 4
Flag Button
White Button
Glitter Blue
Glitter Red
Sunflower Blue
Sunflower Red
Sunflower White Red

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 29,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Devoted to the USA - FTU

 photo devotedtotheusa.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
Which you must obtain a license to use at his store HERE
FTU kit by Gold Dust HERE
Please leave some love when you download freebies

Ok Lets get Started:
Open frame 5 and place as new layer
Grad the magic wand & click inside frame
Selections modify expand by 11
Open paper 2 and place as new layer
Selections invert delete
Move paper under frame
Open fireworks 2&6..place 1 behind each frame on both sides
Open fireworks 7 & place in center of frame

Place your main tube to center of frame

Open fireworks 8&9 place 1 to the right and 1 to the left
Open fireworks 3 & place to left side of frame
Open fireworks 2 & place at right side of frame
Open firecracker hat - resize 68% - place to left of frame
Open flower 3 -resize 66% - place in front of hat
Open flower 1 resize 68% - place beside blue flower to the right
Open flower 2 resize 63% - place in front of other 2 flowers but drop down a little
Open hat 1 - resize 68% -  place beside white flower to the right
Open desert - place to bottom far right of frame
Open cupcake 2- resize 68% - place between hat and desert
Open bird - resize 53% - place in front of desert

Merge your layers

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 19,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Emo Firecracker - FTU

 photo emofirecracker.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
Which you must obtain a license to use at his store HERE
FTU Cluster Frame by Queenie HERE
Please leave some love when you download freebies

Filters:
Mura Meister Copies

Ok Lets get Started:
Open frame - shift D to duplicate and close original
Increase canvas to 700x700
Grad the freehand tool andn draw around frame
Ann new layer and flood fill with solid color
Select none
Add small amt of noise to layer
Add text of choice inside frame - center in frame
Mura Meister Copies and choose tiling
Selections invert delete
Lower opacity to around 68%

Add tube of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 29,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Thursday, June 26, 2014

Let's Have Some Fun - PTU

 photo havesomefun.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Which you must obtain a license to use HERE
PTU Scrap Kit by Purple Dream Scraps called Sexy Hula
You can purchase this awesome kit HERE
Template #611 by Millie HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original

Canvas size 700x700
delete copyright

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Change color of your text to match your kit or tube

Place your main tube

Now time to add our elements
I used the following:
Element 1
Element 2
Element 7
Element 11
Element 12
Element 17
Element 18
Element 26
Element 33
Element 36
Element 37
Element 40
Element 41
Element 45
Element 46

Merge your layers
Open paper 11 and apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 26,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Relaxing on the Beach - FTU

 photo relaxingonthebeach.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Jessica Dougherty
This tube was purchased at CILM which has closed
You can now purchase her tubes at CDO HERE
FTU Scrap Kit by Purple Dream Scraps HERE
Mask of choice
Make sure you leave some love when downloading freebies

Ok Lets get Started:
Open a blank image 700x700
Open frame 2 from kit and place as a new image to far right
Grab the magic wand and click inside frame
Select modify expand by 8
Open paper 8 from kit and place into selections
selections delete
move paper under frames and merge together

Place your main tube to left of frame

Now add any elements of choice
I used the following:
Decor
Flowers
Palm Tree
Sign
Sunscreen
Sunscreen 2

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 25,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Thursday, June 19, 2014

Say it with Music - FTU

 photo sayitwithmusic.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Celinart Pinup
This tube was purchased at SATC which has closed
I'm not sure where she is selling at now..Use another tube of choice
FTU kit by MMeli Crea Designs HERE
Monti's Blind Mask 1 HERE
You will need to scroll down to find mask
Please leave some love when you download freebies

Resize elements to your liking

Ok Lets get Started:
Open new canvas 700x700
Open frame 7 and place as new layer
Grad the magc wand & click inside frame
Selections modify expand by 7
Open paper 7 and place as new layer
Selections invert delete
Move paper under frame

Place your main tube

Now add any elements of choice
I used the following:
Element 11
Element 55
Element 59
Element 60
Element 62

Merge your layers
Open paper 8 & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 19,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Colorful Music - PTU

 photo colorfulmusic.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zebrush
You can purchase these tubes at PFD HERE
PTU kit by Jen from Sweet Temptations called "Rock Me" HERE
FTU Clusters to match kit also found at Jen's blog HERE
Mask of choice
Please leave some love when you download..A little thanks goes a long way

This is a very simple and easy tut
Just place your elements where you want them

Ok Lets get Started:
Open blank canvas 700x700
Open frame 3 & place as a new layer
I deleted the paper background
Click inside frame with magic wand
Selection modify expand by 10
Open paper 3 & place as a new layer
Selections invert delete
Move paper under frame

Place your main tube
Add elements around the tube

I used the following:
CD
Lights 1&2
Record
Piano
Music Note Bubble
Love Notes

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 19,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Happy - FTU

 photo happy.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Elias Chatzoudis
Tube was purchased at MPT which has closed
You can purchase these tubes HERE
FTU kit by Scraps Dimensions HERE
Mask of choice
Please leave some love when you download..A little thanks goes a long way

This is a very simple and easy tut
Just place your elements where you want them
Ok Lets get Started:
Open blank canvas 700x700
Open frame 2 & place as a new layer
Click inside frame with magic wand
Selection modify expand by 10
Open paper 12 & place as a new layer
Selections invert delete
Move paper under frame
I added text to my background

Place your main tube inside frame

Add elements around the tube
I used the following:
Bird
Flowers 2
Flowers
Leaves
Ribbon 2

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 19,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Tuesday, June 17, 2014

Bad Girl - FTU

 photo badgirl-1.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Barbara Jensen
You can purchase these tubes HERE
FTU scrapkit by TK Designs HERE
FTU Cluster Frame by TY Designs HERE
Mask of choice

Plugins Used:
Xero Porcelin

Ok Lets get Started:
Open cluster frame - Shift D to duplicate and close original
Increase canvas size 700x700
Grab the magic wand & click inside frame
Selections modify expand by 10
Open black paper and paste as new layer
Selections invert delete
Move paper under frame
Add close up of tube inside frame to far right
Duplicate tube and move to left side
Merge the tubes layer together
Apply Xero Radiance at default settings
Change blend mode to Luminance

Add main tube to right of frame
Apply Xero Radiance again with settings of choice

Open green ribbon and place to top left of frame
Open purple ribbon and place to top left of frame and move down a little
Open flower heart - resize 88% and place to top left corner
Open flower skull - resize 88% and place to bottom left corner
Open heart cuffs - resize 86% and place to bottom left corner
Open frame 1 and place behind frame with part of white frame showing at top
Merge layers together
Open badgirl paper and apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 3,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Exclusive Tutorial for TTL

 photo summerisgettinghot.png
This tutorial is exclusive for TTL only
Made with an exclusive kit by tee found at our forum photo rhondaSiggyApr2013.png

Punks Not Dead - PTU

 photo punksnotdead.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Arthur Crowe
This tube was purchased at PTE which has closed
You can purchase his tube at his store HERE
PTU Scrap Kit by Addictive Pleasures HERE
Template #243 by Denz Designz HERE
Mask of choice
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright, raster 6&7

Click on raster 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on raster 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original

Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on raster 3 circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Place your main tube
Xero radiance with settings of choice

Now add any elements to your tag
I used the following:
Buttons
Decor
Decor 2
Dragon
Heart
Mesh
Netting 2
Sign
Skull
Splatter
Sticker
Tag 2

Merge your layers
apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 17,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Saturday, June 14, 2014

Rainbows Never End - PTU

 photo rainbowsneverend.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Myka Jelina
This tube was purchased at CILM which has closed
You can find this artists work HERE
PTU Scrap Collab Kit from Designs by Sarah called "Follow Your Own Rainbow"
You an purchase this awesome kit at Pimp My Tags With Scraps HERE
Mask by Images by Fran HERE

Plugins Used:
Xero Radiance

Resize your elements to your liking

Ok Lets get Started:
Open blank canvas 700x700
Open frame 2 and place in center
grab the magic wand and click inside frame
Selections modify expand by 6
Open paper 1 and paste as new layer
Selections invert delete
Open notebook paper frame & place at bottom behind other frame
Selections modify expand by 6
Open paper 5 and paste as new layer
Selections invert delete

Place your main tube to left of frame
Apply Xero Radiance with settings of choice

Now add any other elements you want to your tag
I used:
Buttons 1,2&3
Clouds
Flower 1&2
Glitter Splat 1
Knot flower
Rainbow

Merge your layers
Open paper 7 & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 14,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Homemade - FTU

 photo homemade.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Pinup Toons
You can purchase these tubes at CDO HERE
FTU Cluster frame by Scraps by DonnaW HERE
Word art by Bethany HERE
Mask of choice
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Porcelin
Xero Fritillary
Filters Unliminted Fine Cotton Paper

Ok Lets get Started:
Open cluster frame - resize as desired
Shift D to duplicate & close original
Canvas size 700x700
Grab freehand tool and draw around frame
Open new layer & flood fill with gradient of choice
Selections invert delete
Move paper under frame
Apply Xero Fritillary with settings of choice
Duplicate frame & paper and place behind original frame
Move this frame up to the top
Open word art and resize
Apply Eyecandy Gradient Glow

Place tube in center
Apply Xero Porcelin with settings of choice

Merge your layers
New layer & apply solid color
Apply Filters Unliminted Fine Cotton Paper
Apply mask of choice
I added blind effect also

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 14,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Show off tag from tutorial

 photo rhonda_beautyinbloom_zps9bb17ed7.png
Darlene from The Taggers Lounge sent me her result form my tutorial Beauty in Bloom
TYSM Darlene for sharing your work and trying my tutorial photo rhondaSiggyApr2013.png

Fantasy Forest Beauty - PTU

 photo fantasyforest.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
Which you must obtain a license to use HERE
PTU Scrap Kit by Chachaz Creations called Fairyland
You an purchase this awesome kit HERE
Template #45 by TwystedT's Playroom HERE
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 90%
Canvas size 700x700
delete copyright, and raster 10

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on copy of layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Place your main tube

Now time to add our elements
I used the following:
Element 2
Element 11
Element 17
Element 18
Element 20
Element 27
Element 28
Element 34
Element 41
Element 42
Element 46
Element 48
Element 49
Element 52
Element 58

Merge your layers
Open paper 3 and apply mask of choice
I added a weave effect to mask layer

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 14,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

So Cute - FTU

 photo socute.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Very Many
You can purchase this tube at their shop HERE
FTU Scrap Kit by Regina Falango HERE
Template #527 by Millie HERE
Mask of choice
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete the copyright

Click on raster 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original

Click on raster 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on raster 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on raster 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original

Click on rater 6&8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on raster 7&9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Add close up of tube inside the frames
apply Xero Radiance with settings of choice

Place your main tube in the circle frame
Xero radiance with settings of choice

Now add any elements of choice
I used the following
Element 19
Element 34
Element 35
Element 9
Element 15
Element 32
Element 35
Element 57

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 14,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Wednesday, June 4, 2014

Nurse Feel Good - FTU

 photo nursefeelgood.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Elias Chatzoudis
You can purchase his work at his store HERE
FTU Scrap Kit by TK Designs HERE
Template #14 by Wendy HERE
Mask of choice
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas 700x700
Deleted copyright & dotted lines

Click on circle background selections,select all, float,defloat
paste a paper of choice from the kit - I used emergency paper
selection invert delete
select none delete the original

Click on circle frame selections,select all, float,defloat
paste a paper of choice from the kit - I used black paper
selection invert delete
select none delete the original

Click on bg left selections,select all, float,defloat
paste a paper of choice from the kit - I used white paper
selection invert delete
select none delete the original

Click on bg right selections,select all, float,defloat
paste a paper of choice from the kit - I used bloodsplatter paper
selection invert delete
select none delete the original

Click on frames selections,select all, float,defloat
paste a paper of choice from the kit - I used red paper
selection invert delete
select none delete the original

Place your main tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Heart 1
Medical Bag
Prescription
Stethoscope
Syringe

Merge your layers
Open red white check paper and apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 4,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Showing off tag by Bobbie

 photo LoveandTouch-Rhonda_zpsdf026788.png
Bobbie tried my tutorial Love and Touch & sent her results
TYSM Bobbie for trying my tutorial photo rhondaSiggyApr2013.png

Cupcake Angel - PTU

 photo cupcakeangel.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Pinup Toons
This tube was purchased at CILM which has closed
You can now purchase these tubes at CDO HERE
PTU Scrap Kit from Digital Indulgence called "Sprinkles Cupcakes"
You an purchase this awesome kit at Pimp My Tags With Scraps HERE
Template #584 from Millie HERE
Mask of choice

Plugins Used:
Xero Radiance

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright & layer 3

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper20
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on layer 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on layer 10 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 11 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original

Click on layer 12 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original

Place your main tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Brad 5
Button 2&5
Coiled Fabric 1&2
Cupcake 3,4&5
Flower Button 2
Paper Flower 1&2
Rainbow
Smaller Brad 2
Wired Wordart 2

Merge your layers
Open paper and apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 1,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Rock On - PTU

 photo rockon.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Ismael Rac
You can purchase his work HERE
PTU Scrap Kit by Jen from Sweet Temptations called "Rock Style"
You an purchase this awesome kit HERE
Template #240 by Denz Designz HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance
Xero Fritillary
Eyecandy 4000 Gradient Glow
PhotoEffex Scanlines

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright

Click on circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on white back selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on pink back selections,select all, float,defloat
add new layer and flood fill with gradient of choice
select none delete the original
add close up of tube
apply Xero Radiance at default settings
change blend mode to overlay
apply PhotoEffex at default settings

Click on strips selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on word art selections,select all, float,defloat
add new layer and flood fill with gradient of choice
select none delete the original
apply Xero Fritillary with settings of choice
apply Eyecandy Gradient Glow

Click on hearts selections,select all, float,defloat
add new layer and flood fill with color of choice
select none delete the original
add noise with settings of choice
apply Eyecandy Gradient Glow

Apply Eyecandy Gradient to small word art

Place your main tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
CD
Mat 1&2
MP3 Player
Music Note Bubble
Piano
Skull
Smart Phone
Spotlight
VIP Pass

Merge your layers
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 1,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Waiting for an Angel - FTU

 photo waitingforanangel.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Barbara Jensen
You can purchase her tubes HERE
Cluster Frame by Kimeric Kreations  HERE
Mask#12 by Vix  HERE

Plugins Used:
Xero Radiance
Filter Unliminted Fine Canvas

Ok Lets get Started:
Open blank canvas 700x700
Open cluster, resize & place in center
Using the selection tool draw around frame
Add new layer under frame and flood fill with solid color
Apply Filter Unliminted Fine Canvas
Add tube in center
Apply Xero Radiance with settings of choice

Merge layers
Add new layer & flood fill with another solid color of choice
Apply mask then weave effect

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on June 2,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
 photo rhondaSiggyApr2013.png

Yellow Spring - FTU

 photo yellowspring.png
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Ismael Rac
Which you must obtain a license to use at his store HERE
FTU Scrap Kit by Tasha HERE
Mask of choice
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open blank canvas 700x650
Open window and place in center
Open swooch and place in center of window
Open tube of choice and place in center

Now time to add our elements
Open flowers and place to bottom left
Duplicate flowers, image mirror
Open flowers 2 - resize 42% and place behind flowers in the center
Duplicate flowers 2 and place beside each other
Open grass resize 42% - duplicate 3 times
Place grass behind the flowers
Open branch resixe 48% and place to left behind flower
Duplicate,image mirror
Open butterflies resize 40% and place where desired
Duplicate as many times as you like

Merge your layers
Open paper 1 and apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on May 16,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png