Pages

Saturday, November 29, 2014

Sleigh Bells Ring - FTU

 photo sleighbellsring.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Jennifer Janesko
You can purchase these tubes at CDO HERE
FTU kit by Candy's Treats HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open leaf frame 2 and paste as new layer
Grab the magic wand and click inside frame
Selections modify expand by 15
Drop down and add a new layer
Open paper 1 from freebie folder and paste into selection
Add tube of choice inside frame
Merge these layers as one
Open ct1Frame1 and place behind other frame
Apply glitter spill of choice between the 2 frames on both sides
Open butterfly flight, resize and place to top left of clusters
Duplicate this and mirror
Resize second butterfly again and place to right hand side
Open bells on string and place on top of stars in cluster
Open wordart 4 & place where you like
Add eyecandy gradient or some type of border

Apply mask of choice
Place your name where you like it

Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 21,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
 photo rhondaSiggyApr2013.png

Thankful Harvest - FTU

 photo thankfulharvest.png

Tube of choice: I'm using the wonderful art work of Pinup Toons
You can purchase these tubes at CDO HERE
FTU Scrap Kit by Dreamland Designs HERE
Template by StyleLicious HERE
Mask of choice
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Porcelin

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright and wordart

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original

Click on layer 2&4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper17
selection invert delete
select none delete the original
add noise

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
add noise

Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Place your main tube
apply Xero Porcelin with settings of choice

Now add any other elements of choice
I used the following:
Apple Barrel
Corn Stalk
Fall Flower Basket
Indian Corn
Pine Candle
Tree
Twined up Wood
Yellow Flower

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 29,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Monday, November 24, 2014

Show off from my tutorial

 photo mm111614rhonda-vi.png
 photo AngelicaSBlessedBe_Louise_zps859fdd72.png
 photo Melissa-ACBlessedJLG_zpse84dd593.png
 photo Rhonda_Feya_MM2014_zpsc2edfb82.png
 photo Rhonda_MystMast11-16_zps27a230c6.png
 photo AngelicaSBlessedLD-Rhonda_zpsddd11662.png

Over at The Taggers Lounge we have a weekly Mystery Tutorial Masterpiece Challange
My tutorial Blessed by Autumn was used this week
The members done a great job as always
Come on over and join us. You can find the link at the top of the blog photo rhondaSiggyApr2013.png

Apple Delight - FTU

 photo appledelight.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Arthur Crowe
You must obtain a license to use HERE
FTU Scrap Kit from Sinfully Creative Scraps HERE
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open frame 2
Click inside with magic wand & expand by 8
Open paper 6 and paste as new layer
Selections invert delete
Move paper under frame

Place your main tube & build around it

Now time to add our elements
I used the following:
Element 4
Element 5
Element 6
Element 7
Element 8
Element 9
Element 15
Element 17
Element 19
Element 23
Element 24
Element 26
Frame 1

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 24,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Turkey Pumpkin - FTU

 photo turkeypumpkin.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You must obtain a license to use HERE
FTU Scrap Kit from Icy Blue Mystic Designs HERE
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open Frame 3, resize and place in center
Click inside frame with magic wand
Expand by 8
Open paper 1 and paste as new layer
Selections invert
Move paper under frame

Place your main tube where desired

Now time to add our elements
I used the following:
Butterfly 1
Leaf Cluster 1
Leaf Cluster 2
PickAPumpkin
Turkey

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 24,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Thursday, November 20, 2014

Fun at Santa's - PTU

 photo funatsantas.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Misticheskaya
You must obtain a license to use at PFD HERE
PTU Scrap Kit from Icy Blue Mystic Designs called CocoaWhite
You can purchase this kit at one of her stores HERE
Mask #15 from Leah HERE

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open Gingerbread House and place in center
We will use this to build our tag

Place your main tube where desired

Now time to add our elements
I used the following:
Berry Bush 4
CoCoa Mug
Flower 1&3
Frame 6
Lamp Light
Lights 2
Puppy with CandyCane
Santas Gift
Santas Sleigh
Snowman 1
Snowman on Ice
Three Happy Snowmen

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 20,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Wednesday, November 19, 2014

Showing off tags from tutorials


Bobbie is such a wonderful and great friend. 
She always sends me her results when doing my tutorials
Here are a few she sent me this week and she done an awesome job
TY Bobbie for supporting me!!!!!!!!!!!!! photo rhondaSiggyApr2013.png

Santa's Workshop - PTU

 photo santasworkshop.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Very Many
You can purchase this work at their store HERE
PTU Scrap Kit by Jen from Sweets Temptations called "Rock this Christmas"
You can purchase this kit from her blog HERE
Template #220 by Denz Designz HERE
Mask of choice
Don't forget to leave a thank you when downloading

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 115%
Canvas size 703x700
delete copyright,wordart,shape1,circle1 & rectangle

Click on shape 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on circle 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on circle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on shape 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Place your main tube

Now add any other elements of choice
I used the following:
Bag
Candle 2
Candy 2
Cupcake 1
Elf
Hat
Peppermint Stick
Sack
Santa's Workshop Sign
Sign
Stocking

Merge your layers
Add paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 19,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Tuesday, November 18, 2014

Christmas Surprise - PTU

 photo christmassurprise.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlata_M
This tube was a prepaid which was gifted to me at SATC which has closed
PTU Scrap Kit by Chachaz Creations called First Christmas
You an purchase this awesome kit at S&CO HERE
Mask of choice

This is a very simple & easy tutorial
Just place your elements where you want them

Open blank 700x700 canvas
Open element 41 and place in center
I used this element to build my tag

Place tube of choice to far left of frame

Now time to add our elements
I used the following:
Element 1
Element 2
Element 3
Element 4
Element 19
Element 27
Element 28
Element 38
Element 45
Element 47
Element 48
Element 49

Merge your layers
Open paper 3 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 18,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Sunday, November 16, 2014

Merry Pink Christmas - PTU

 photo merrypinkchristmas_joan.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Vi Nina
You must obtain a license to use this art at S&Co HERE
PTU Scrap Kit from Designs by Joan called "Merry Xmas"
You can purchase this awesome kit at S&Co HERE
Mask of choice

Ok Lets get Started:
This is a very quick and easy tutorial
Resize elements to your liking

Open blank 700x700 canvas
Open element 11 & place in center of tag
Grab the magic wand & click inside frame
Selections modify expand by 10
Add new layer under frame
Open paper 7 & paste as new layer
Selections invert delete

Place your main tube

Now time to add our elements
I used the following:
Element 3
Element 5
Element 7
Element 23
Element 30
Element 33
Element 38
Element 39
Element 46
Element 50
Element 59
Element 60
Element 64
Element 65
Element 69
Element 74
Element 77
Element 79
Element 82

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 16,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Thanksgiving Gathering - PTU

 photo thanksgivinggathering.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Pandora Creation
You must obtain a license to use this art at S&Co HERE
PTU Scrap Kit from Mysterfeerie Creations called "Happy Thanksgiving"
You an purchase this awesome kit at S&Co HERE
Template #204 from Kristin HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template to your liking
delete copyright & layer 12

Click on layer 11 & copy of 11 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original

Click on layer 10 & copy of 10  selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on layer 9 & copy of 9  selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 6 & copy of 6  selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original

Click on layer 5 & copy of 5  selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on layer 7 & copy of 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 8 & copy of 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original

Place your main tube

Now time to add our elements
I used the following:
Element 4
Element 5
Element 7
Element 9
Element 10
Element 20
Element 28
Element 29
Element 38
Element 41
Element 49
Element 51
Element 77
Element 78
Element 92
Element 99

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 14,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Wednesday, November 12, 2014

Crisp Autumn Day - PTU

 photo crispautumnday.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You must obtain a license to use HERE
PTU Scrap Kit from Icy Blue Mystic Designs called Changing Seasons
You can purchase this kit at one of her stores HERE
Mask #92 by Millie HERE

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Place your main tube & build around it

Now time to add our elements
I used the following:
Apple 1&2
Butterfly 1,2&3
Create 1&2
Ladder 2
Leaves Frame 1,2,3&4
Owl
Squirrel
Sunflower2&3
Tree

Merge layers
Open paper of choice and apply mask
I used 2 different papers

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 11,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Tuesday, November 11, 2014

Live Each Day - FTU

 photo lovegraxegratitude.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Alex Prihodko
You can purchase his work at PFD HERE
FTU Scrap Kit by Melissa HERE
Template by Dee HERE
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Radiance

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright, circles and hearts

Click on left & right brown rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on top rust rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on bottom rust rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on blue oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on rust strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Add closeup of tubes inside the cream squares
Apply Xero Radiance with settings of choice

Click on center brown circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete

select none delete the original
Click on center shape white selections,select all, float,defloat
addnew layer and flood fill with color of choice
selections invert delete
select none delete the original

Place your main tube
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Element 10
Element 11
Element 14
Element 19
Element 20

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 11,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Friday, November 7, 2014

Thanksgiving Friends - PTU

 photo thanksgivingfriends.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlata_M
You must obtain a license to use HERE
PTU Scrap Kit from Icy Blue Mystic Designs called Thanksgiving Friends
You can purchase this kit at one of her stores HERE
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open frame 7 & place in center of tag
Grab the magic wand & click inside frame
Selections modify expand by 10
Open paper 2 and paste as new layer
Move paper under frame

Place your main tube & build around it

Now time to add our elements
I used the following:
Autumn Bear
Blossom 3&4
Butterfly 1&2
Chick 1&2
Crate 2
Daisy 2&3
Flower 1
Geckos
Grass 2
HummingBird 2
Pumpkin 1&2
Pumpkin Barrel
Sign 2

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 8,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Wednesday, November 5, 2014

Dog Park - PTU

 photo dogpark_danny.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Danny Lee
You must obtain a license to use this art at S&Co HERE
PTU Scrap Kit from Whisper in the Wind called "Fall Fashion"
You an purchase this awesome kit at S&Co HERE
Template #695 from Millie HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Increase canvas to 700x700
Delete copyright,wordart & small blocks

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Place your main tube

Now time to add our elements
I used the following:
Element 2
Element 30
Element 35
Element 37
Element 49
Element 50
Element 51
Element 53
Element 58
Element 59
Element 62
Element 64
Element 65
Element 66
Element 71
Element 78
Element 79
Element 80
Element 82
Element 84
Element 89
Element 90
Element 92
Element 95
Element 106

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 4,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Change is Coming - PTU

 photo changeiscoming_gaby.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Andy Cooper
You must obtain a license to use his art at S&Co HERE
Matching PTU Scrapkit by Disturbed Scraps called Watching the leaves Turn
You can purchase this kit from S&CO HERE
Mask of choice

Resize elements to your liking

Ok Lets get Started:
This is a very quick and easy tutorial

Open blank canvas 700x700
Open element 71 and place in center
Grab the magic wand & click inside frame
Selections modify expand by 10
Add new layer under frame
Open paper 14 & paste into selections

Place main tube to right of tag

Add any other elements you want from the kit
I used:
Element 4
Element 7
Element 8
Element 16
Element 19
Element 21
Element 27
Element 30
Element 48
Element 59
Element 60
Element 62
Element 63
Element 79
Element 83

Merge layers
Open paper 3 & apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 4,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Monday, November 3, 2014

Autumn Love - FTU

 photo autumnlove.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You can purchase his work at his store HERE
FTU Scrap Kit by Wicked Princess HERE
Autumn Template by Dee HERE
Mask of choice
Don't forget to leave a thank you when downloading

Plugins Used:
Xero Porcelin

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 90% all layers
Canvas size 700x700
Deleted copyright,leaves & small dotted rectangles

Click on orange circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on dotted circle selections,select all, float,defloat
add new layer and flood fill with color of choice
select none delete the original

Click on cream oval & cream heart selections,select all, float,defloat
add new layer and paste a gradient of choice
select none delete the original
add noise with settings of choice

Click on pink oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on orange rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on red heart selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on yellow rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on small cream rectangle selections,select all, float,defloat
paste close-up of tube inside each
selection invert delete
select none delete the original
apply Xero Porcelin to tubes

Place your main tube
Xero Porcelin with settings of choice

Now time to add our elements
I used the following:
Acorns
Bags
Branch Fruit
Carnation
Green Branch Leaf
Hat
Leave Duo
Mushrooms
Orange Bud
Orange Daisy
Squirrel
Stumps

Merge your layers
Open paper 3 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 3,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Sunday, November 2, 2014

Harvest Tradition - FTU

 photo harvesttradition.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Jennifer Janesko
This tube was purchased at CILM which has closed
Which you must obtain a license to use at CDO HERE
FTU Scrap Kit by Dreamland Design HERE
Mask of choice
Don't forget to leave a thank you when downloading

Resize elements to your liking

Ok Lets get Started:
Open blank canvas 700x700
Open frame 1 & resize
Place in center of canvas
Click inside frame with magic wand and expand by 10
Add new layer under frame
Open paper 17 and paste into selections
Select none

Now time to add our elements
I used the following:
Barrel of Apples
Fall Flowers
Indian Corn
Leaf Vine
Pumpkin
Tree

Place your tube

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 2,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Saturday, November 1, 2014

Witch Hound - FTU

 photo witchhound.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Maryline Cazenave
You must obtain a license to use this art at CDO HERE
FTU Scrapkit from Jens Sweet Temptations HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x650
Open frame 1 and place as new layer
Resize frame 80%
Image rotate 12 degrees to left
Move frame to right hand side
Duplicate fame and mirror
Merge the 2 frames as 1 layer
Click inside each frame with magic wand
Selections modify expand by 10
Add new layer under frame and flood fill with light purple color
Selections none
Add noise random 26%
Place your tube in middle of frame
Open spider bow - resize 48% and place to top left & right of frame
Open bling and place on each side of frame
Open cupcake - resize 65% and place to far right of frame
Open bat in box - resize 57% and place to far left of frame
Open books - resize 65% and place in front of bat in box
Open mice - resize 32% and place in front of books

Merge your layers
Open paper 3 and apply mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 22,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Cold Days - PTU

 photo colddays_chacha.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Danny Lee
Which you must obtain a license to use HERE
PTU Scrap Kit by Chachaz Creations called Cold Days
You an purchase this awesome kit at S&CO HERE
Mask #3 by Savage HERE
Don't forget to leave a thank you when downloading

This is a very simple & easy tutorial
Just place your elements where you want them

Open blank 700x700 canvas
Open element 14 and place in center
Click inside frame with wand
Selections Modify by 20
Add new layer under frame
Open paper 4 and paste into selections

Place tube where you want

Now time to add our elements
I used the following:
Element 3
Element 5
Element 6
Element 10
Element 20
Element 22
Element 29
Element 39

Merge your layers
Open paper 2 and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 1,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Halloween Party - PTU

 photo halloweenparty.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Danny Lee
You must obtain a license to use this art at S&CO HERE
PTU kit by Purple Dream Scraps called Halloween Party HERE
Mask of choice

Ok Lets get Started:
Open blank canvas 700x700
Open element 18, resize and place in center
Click inside frame with wand
Selections expand by 10
Add new layer under frame
Open paper 6 and paste into selections

Place your main tube

Now time to add our elements
I used the following:
Element 1
Element 6
Element 8
Element 13
Element 24
Element 25
Element 27
Element 31
Element 36
Element 37
Element 40
Element 47
Element 52
 
Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 1,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png

Spider Witch - FTU

 photo spiderwitch.png

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Ellie_Milk
You can purchase this work at HERE
Scrapkit by  De Pages en Pages HERE
Mask of choice

Make sure to sharpen all elements and add dropshaow of choice

Ok Lets get Started:
Open new canvas size to 700x700
Open frame from kit  - resize 44%
Place in center of canvas
Click inside frame with magic wand and expand by 10
Open paper 6 resize 20% and apply
Selections invert delete
Move paper under frame
Open leaf - resize 44%
Place behind frame to right side
Duplicate mirror and move this one up toward top at left side
open verdure 2 resize 55%
Place to right side of frame
Duplicate mirror to left side
Merge these 2 layers then duplicate again
Flip the duplicated one and move towards the bottom
The vines will cover your frame
Open splatter - resize 39% & place on top of vines
Open spider web resize 39% and place on top of splatter
Open yeux2 resize 20% and place on top of spider web to right hand side
Open fleurs 2 resize 27% and place at bottom right
Duplicate this to make it brighter & merge together
Duplicate again and mirror to the left
Open chrysnatheme resize 27 and place between the 2 white flowers
Open spider resize 15% and place to top right of web near the edge
Open bat resize 11% and place to top left of tag

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 15,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental photo rhondaSiggyApr2013.png