Wednesday, March 16, 2016
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Dean Yeagle
This tube was purchased at at CILM which has closed
You can purchase his work at CDO HERE
FTU Scrapkit by PolkaDot Scraps called Rain Drops HERE
Template #460 by Millie HERE
Mask by Razor Queen HERE
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 110% all layers
Delete copyright
Click on raster 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original
Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original
Place your tube
Xero Porcelin with settings of choice
Now time to add our elements
I used the following:
Element 8
Element 18
Element 24
Element 25
Element 26
Element 37
Element 44
Element 46
Element 47
Element 48
Frame 6
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 16,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
All supplies from this tutorial is from Here2Help Mirella
This is a huge collection of kits,clusters,papers,masks,templates and tubes
Collab is well worth the money and for a wonderful cause
Collab can be purchased at DeesSign Depot HERE
Tube of choice: I'm using the wonderful art work of Mariel
Cluster frame by Jessica
Scrapkit by Kizzed by Kelz
Mask by Lisa Marie
Ok Lets get Started:
Open a blank 700x700 image
Open frame from Jessica and move to left side of canvas
Using selection tool draw around frame
Open paper 2 from kit and paste as new layer
Selections invert delete
Move paper under frame
Place your tube
Now add any other elements of choice
I used the following:
Element 3
Element 9
Element 16
Element 20
Element 23
Element 30
Element 34
Element 35
Merge your layers
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 16,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Tuesday, March 15, 2016
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Ismael Rac
You can purchase his work HERE
PTU Scrap Kit by Bella Caribena called Bright Vibrant Spring
Kit purchased at Mystical Scraps HERE
Template #505 by Millie HERE
Mask of choice
Don't forget to leave a thank you when downloading
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Increase canvas to 700x700
Deleted copyright,wordart and hearts
Click on layer 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original
Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
add noise
Place your tube to left of tag
Xero Radiance with settings of choice
Now time to add our elements
I used the following:
Element 10
Element 11
Element 20
Element 52
Element 56
Element 73
Element 79
Element 81
Element 105
Element 108
Element 109
Element 110
Element 111
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 15,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Monday, March 14, 2016
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Misticheskaya
You must obtain a license to use this art at PFD HERE
PTU Scrap Kit by A Space Between called Blooming Brights
This kit is no longer available for purchase so use any kit you may have
Template #558 by Millie HERE
Mask of choice
Don't forget to leave a thank you when downloading
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Deleted copyright
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original
Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original
Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
I merged the wordart and added a gradient glow
Place your tube in center
Xero Radiance with settings of choice
Now time to add our elements
I used the following:
Element 4
Element 6
Element 10
Element 12
Element 15
Element 19
Element 25
Element 27
Element 28
Element 29
Element 30
Element 31
Element 37
Element 42
Element 44
Rosettes 1&3
Merge your layers
Open paper of choice & apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 14,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Sunday, March 13, 2016
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Lagunna
Which you must obtain a license to use at PFD HERE
PTU Scrapkit by Niqui's Designs called "Spring is Here"
You can purchase this awesome kit HERE
Template #2 by Squirrely HERE
Mask of choice
Don't forget to leave a thank you when downloading
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Delete copyright, layers 4,14 15&16
Click on layer 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
Click on layer 5&6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original
Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
Click on layer 11 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
Click on layer 12 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
Click on layer 13 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original
Place your tube
Now time to add our elements
I used the following:
Element 1
Element 2
Element 3
Element 7
Element 10
Element 13
Element 14
Element 23
Element 26
Element 28
Element 29
Element 34
Element 39
Element 43
Element 53
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 13,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Friday, March 11, 2016
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Ismael Rac
This tube was purchased at MPT which has closed
You must obtain a license to use his art now HERE
PTU Scrapkit by Purple Dreams Scraps called Easter Bunny
You can purchase this kit at PFD HERE
Mask of choice
Ok Lets get Started:
This is a very quick and easy tutorial
Open blank 700x700 canvas
Open element 28 & paste as a new layer
Click inside of the frame
Modify by 10 and add paper from kit
Open element 45 and resize
Place in center of frame
Apply Mura Meister Copies using tiling
Selections invert delete
Change blend mode to soft overlay
Place tube to left side
Add any other elements you want from the kit
I used:
Element 3
Element 4
Element 6
Element 9
Element 13
Element 14
Element 17
Element 18
Element 19
Element 20
Element 25
Element 26
Element 27
Element 31
Element 35
Element 40
Element 44
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 12,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Misticheskaya
You can find these tubes at PFD HERE
PTU Scrapkit by Coffee Arts Design's called "Spring Rain"
You can purchase this kit at store HERE
Template #186 by Denz Designz HERE
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize all layers 110%
Increase canvas size to 700x700
Delete copyright, circles and heart line
Click on red strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original
Click on pink square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
Click on black circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
Click on pink circle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
Click on back 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
Click on back 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
Click on back 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
Click on black strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
Click on red strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
Click on pink circle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Place your tube
Now time to add our elements
I used the following:
Cattails with Flowers 1
Flower 4
Flower Pot
Rain 1
Water Can
Butterfly 1&2
Fence
Cloud 1
Wordstrip 6
Merge layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 11,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Jose cano
You can purchase these tubes HERE
PTU Scrap Kit by Tiny Turtle Design called "Dangerous"
You can purchase this awesome kit at her store HERE
Mask of choice
Ok lets get started:
Open blank canvas 700x700
Open element 126 & place in center of canvas
Rotate frame a little to the left
Place closeup of tube inside the frame squares
Apply Xero Radiance with settings of choice
Place your tube to the left
Add Xero Radiance again
Now add any other elements you want from kit
I used:
Element 16
Element 19
Element 36
Element 54
Element 68
Element 74
Element 77
Element 81
Element 84
Element 89
Element 102
Element 109
Element 147
Element 149
Element 194
Element 239
Element 256
Element 260
Element 290
Element 293
Element 299
Merge layers and apply mask of choice
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 11,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Arthur Crowe
You can purchase these tubes HERE
PTU Matching Scrapkit by Kizzed by Kelz HERE
You can purchase the kit and tube as a bundle
Template #42 by Just Like Candy Designs HERE
Don't forget to leave a thank you when downloading
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Deleted copyright
Click on back light blue circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
Click on upper right circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
Click on middle black squares selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
Click on left lighter blue circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
Click on bottom blue rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
Click on darker blue rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
Place your main tube in the center
Xero radiance with settings of choice
Now add any other elements of choice
I used the following:
Element 4
Element 5
Element 6
Element 8
Element 11
Element 14
Element 16
Element 18
Element 19
Element 23
Element 25
Element 28
Element 29
Element 31
Element 33
Element 34
Element 35
Element 36
Element 37
Merge your layers
Open paper 8 and apply mask of choice
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 11,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Elias Chatzoudis
This tube was purchased at MPT which has closed
You can purchase his tubes at his store HERE
PTU Scrap Kit by Nicky from Inzpired Creationz called "Blue Emo"
Nicky's kit are no longer available so use whatever kit you may have
I will continue to use her awesome work for tutorials
Template #14 from Sylvie HERE
Look on the right side of blog for older templates to find this one
Don't forget to leave a thank you when downloading
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas 700x700
Delete copyright & grey rectangle
Click on dotted circles selections,select all, float,defloat
add layer and apply solid color of choice
selection invert delete
select none delete the original
Click on large pink circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
Click on right black square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Click on left black square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
Click on white circle selections,select all, float,defloat
add layer and apply solid color of choice
selection invert delete
select none delete the original
add noise
Click on small pink circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
Place your main tube
Add Xero Radiance with settings of choice
Now time to add our elements
I used the following:
Cupcake 1&2
Emo Teddy 2
Frame 2
Heart 1
Ipod
Kitty
Ribbon 1&2
Scattered Stars & Gears
Shoe 1
Skull 3
Sparkles 2
Merge your layers
Use any paper and mask of choice
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 11,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zindy S.D. Nielsen
You can purchase her work HERE
FTU Scrap Kit by Nicky from Inzpired Creationz called "Enchanted Dreams"
Nicky's kits are no longer available for download but I will continue to honor her work
Mask of choice
Ok Lets get Started:
Open a blank canvas 700x700
Open frame 2 and place to center
Using magik wand click inside and espand by 10
Open new layer under frame
Open paper 4 and paste into selection
Select none
Now time to add our elements
I used the following:
Butterflies
Door 1
Floating Tree and Unicorn
Flower 3
Grass1
Ladder
Moon 2
Mushroom 1-4
Pillows
Sparkles 1
Tree
Wordart 2
Merge your layers
Add mask and paper of choice
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 11,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Very Many
You can purchase their tubes HERE
PTU Scrap Kit by Tiny Turtle Design called "Antique Stea Kit"
You an purchase this awesome kit at her store HERE
Mask of choice
Ok lets get started:
Open blank canvas 700x700
Open element 8 & place in center of canvas
Place your main tube in the center
Add Xero Radiance
Grab the selection tool and draw a rectangle around the frame
Add new layer under frame
Open paper 29 and place into selection
Now add any other elements you want from kit
I used:
Element 27
Element 29
Element 33
Element 35
Element 40
Merge layers and apply mask of choice
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 11,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Sunday, March 6, 2016
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Fiodorova Maria
Which you must obtain a license to use HERE
Mask by Vix HERE
Don't forget to leave a thank you when downloading
Ok Lets get Started:
Open a blank image 700x700
Open element 11 and place as a new layer
Open element 44 and place as new layer
Grab the magik wand and click inside element 11
Open paper 10 and place as a new layer
Selections invert delete
Move paper under frames
Place your main tube
Now add any elements of choice
I used the following:
Element 2
Element 5
Element 8
Element 17
Element 25
Element 54
Element 55
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 5,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Gennadiy Koufay
Thia tube was purchased at CILM which has cosed
You must obtain a license to use her art now at CDO
PTU Scrapkit by A Space between called Some Bunny Loves You
You can purchase this kit at Dee's store HERE
Mask of choice
Ok Lets get Started:
This is a very quick and easy tutorial
Open blank 700x700 canvas
Open element 51 & paste as a new layer
Click inside of the frame
Modify by 10 and add papers from kit
Place tube to center
Add any other elements you want from the kit
I used:
Element 2
Element 3
Element 4
Element 6
Element 9
Element 12
Element 21
Element 27
Element 32
Element 36
Element 37
Element 38
Element 45
Element 53
Element 56
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 5,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
HERE
Saturday, March 5, 2016
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You can purchase their work HERE
PTU Scrap Kit by A Space Between called Fallen in Love HERE
Template #771 by Millie HERE
Mask of choice
Don't forget to leave a thank you when downloading
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Deleted copyright
Click on layer 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
Click on layer 3&4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper21
selection invert delete
select none delete the original
Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper27
selection invert delete
select none delete the original
Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original
Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
add noise
Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
Click on layer 9 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Place your tube
Now time to add our elements
I used the following:
Element 8
Element 10
Element 11
Element 12
Element 18
Element 20
Element 21
Element 37
Element 46
Element 47
Element 49
Element 62
Element 63
Element 67
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 5,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Friday, March 4, 2016
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of KiwiBG
You must obtain a license to use this art at TTD HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Mad Party"
You an purchase this awesome kit at her store HERE
Template #779 by Millie HERE
Mask of choice
Don't forget to leave a thank you when downloading
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template to your desired size
Delete copyright & wordart
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper21
selection invert delete
select none delete the original
add border with noise
Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
add border with noise
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
add border with noise
Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original
add border with noise
Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
Add close up of tube inside circle
change blend mode to screen
apply Xero Porcelin
apply PhotoEffex Scanlines
Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper21
selection invert delete
select none delete the original
add noise
Place your tube
apply Xero Porcelin
Now time to add our elements
I used the following:
Element 10
Element 34
Element 55
Element 56
Element 58
Element 66
Element 78
Element 79
Element 81
Merge your layers
Open paper of choice & apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 4,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Lightartist_XXX
Which you must obtain a license to use HERE
FTU Scrap Kit by Dee HERE
Mask of choice
Don't forget to leave a thank you when downloading
Ok Lets get Started:
Open a blank image 700x700
Open frame 4 and place as a new layer
Open frame 1 and place as new layer
Grab the magik wand and click inside frame 4
Open paper 10 and place as a new layer
Selections invert delete
Move paper under frames
Place your main tube
Now add any elements of choice
I used the following:
Element 1
Element 6
Element 8
Element 19
Element 20
Element 21
Element 23
Element 25
Element 26
Element 28
Element 29
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 4,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Thursday, March 3, 2016
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Lagunna
Which you must obtain a license to use HERE
Template #6 by Yvette HERE
Mask of choice
Don't forget to leave a thank you when downloading
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 90% all layers
Canvas size 700x700
delete copyright
Click on ciecle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
Click on circle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
Click on grey rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Click on rounded rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
Click on large circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
Place your main tube
Xero Radiance with settings of choice
Now time to add our elements
I used the following:
Element 7
Element 9
Element 12
Element 20
Element 21
Element 26
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 2,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Tuesday, March 1, 2016
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You can purchase their tubes HERE
PTU Scrap Kit by Purple Dream Scraps called Welcome Spring
You can purchase this awesome kit from one of her stores HERE
Mask of choice
Ok Lets get Started:
Open a blank image 700x700
Open element 29 and place as a new image
Grab the magik wand and click inside frame
Select modify expand by 10
Open paper 5 and place as a new layer
selections invert - delete
Move under frame
Place your main tube
Now add any elements of choice
I used the following:
Element 1
Element 3
Element 4
Element 7
Element 10
Element 11
Element 15
Element 19
Element 21
Element 23
Element 25
Element 30
Merge layers
Open paper of choice and apply mask of choice
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on March 1,2016 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Subscribe to:
Posts
(Atom)
Grab My Blinkie
I CT For
Blogs I Visit
