This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Maryline Cazenave
I purchased the tube from CDO HERE
Matching Scrapkit by Gimptactic Scraps at CDO HERE
Template #73 by Drama Bomb Designs HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template to your liking
Deleted copyright

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Add close-up of tube then add border with noise

Place your tube to right of tag

Now time to add our elements
I used the following:
Element 1
Element 2
Element 5
Element 8
Element 9
Element 10
Element 13
Element 14
Element 17
Element 18
Element 21
Frame 1&2
Wordart

Merge your layers
Open paper of choice and apply mask
I used 2 months on my tag

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 31,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zindy Zone
You must obtain a license to use HERE
FTU Scrapkit by Tasha's Playground HERE
Mask of choice

Ok Lets get Started:
This is a very quick and easy tutorial

Open blank canvas 700x700
Open frame 5 & place to center
Click inside center of frame with wand
Open paper 5 and add to frame
Place tube to center

Add any elements you want from the kit
I used:
Book
Clock
Flourish 2
Flower 1&3
Flowers
Headband
Key
Ribbon
Scatter
Sparkle

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 30,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

We have a challenge at TTL called Mystery Tutorials
These are the results of 2 that were written by me  TY to the members that participated

 

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Laguna
Which you must obtain a license to use HERE
FTU Scrapkit by Graphics of Fantasy HERE
Template #1 by Millie HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Increase canvas to 700x700
Delete copyright, layers 5,6,7 &8

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Place your tube to center

Now time to add our elements
Open element 123 - resize and place behind tube to right
Open element 62 - resize and plave toward left in front of tube
Open element 64 - resize and place behind strawberries with cherries showing to right
Open element 67 - resize and place beside cherries making it extend to the fruit basket
Open element 14 - resize and place behind tube with flowers showing to the left
Open element 6 - resize and place toward the end of wagon
Open element 16 - resize and place in front of wagon
Open element 9 - resize and place behind basket of fruit
Open elements 75,76,77 - resize and place behind front wagon flowers
Open element 94 - place to top and using deform tool adjust flower to your liking

Place any other fruit or flowers to your tag - decorate of your choosing

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 22,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
This tube was purchased from PFD
Which you must obtain a license to use HERE
PTU Scrapkit by Jens Sweet Temptations called Hot Hot Hot HERE
Kit and clusters will be in stores soon
Template #264 by Millie HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright & wordart

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
add border with noise

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
add border with noise

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
add border with noise

Click on layer 4&5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
add border with noise

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
add border with noise

Place your tube where desired

Now time to add our elements
I used the following:
Element 3
Element 10
Element 12
Element 13
Element 16
Element 17
Element 20
Element 22
Element 24
Element 26
Element 38
Element 39
Element 44
Element 47
Element 48
Element 50
Element 54

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 30,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlata_M
You can purchase these tubes at PFD HERE
Collab kit by Kristin and Tami HERE
Template #15 by Creating with Millie HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Deleted copyright & word art

Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used Kristin paper19
selection invert delete
select none delete the original
add border with noise

Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper
selection invert delete
select none delete the original
add border with noise

Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
add border with noise

Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original
add border with noise

Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used Kristin paper18
selection invert delete
select none delete the original
add border with noise

Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used  Kristin paper11
selection invert delete
select none delete the original
add border with noise

Place your main tube to right of tag
Xero Radiance with settings of choice

Now time to add our elements
I used the following:
Film Strip
Fluffy Heart
Frame
ButterFly 2
Flower 1
Fuzzy Heart
Skull 2
Skull Doodle 2
Star 1
Pearl Swirl 1&2
Sign
Sparkles 2
Splatter
Sticker
Tag

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 29,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Laguna
Which you must obtain a license to use at PFD HERE
PTU Scrapkit by Purple Dreams Scraps called Beach Fun
You can purchase this awesome kit also from PFD HERE
Template #48 by Fired By Flamin HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Delete copyright & sun

Click on red square 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on yellow rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on dashed oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on yellow oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on pink stripes selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on orange circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on circle frame selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Decorate word art to your liking
Place your tube

Now time to add our elements
I used the following:
Element 3
Element 4
Element 5
Element 6
Element 7
Element 8
Element 10
Element 11
Element 16
Element 18
Element 19
Element 20
Element 23
Element 24
Element 35
Element 41
Element 42
Element 44
Element 46
Element 48
Element 52
Element 55

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 29,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

I done these tags and forgot to write down the templates used
I am posting the tags and kits used
Remember a tutorial is just a guide so maybe you can use them
Use your creativity and design your own style      Tube is by Jose Cano and can be purchased HERE Kit by Blissful Designs and also purchased at store HERE Kit and tube are called Femme Fatale & can be purchased as a set   Tube by VeryMany and can be purchased HERE Kit by PinkParadox Productions called Naughty Princess and purchased HERE    

  Tube is by Katharine and can be purchased at PFD HERE Srapkit used is from collab last year called Here 2 Help
  Tube is by Julia Fox and can be purchased at PFD HERE Kit by A Lil Mz Brainstorm called Summer Renevous also purchased at PFD HERE                                

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You must obtain a license to use this art HERE
PTU Scrapkit by PinkParadox Productions called Exotic Allure 1 HERE
Template #5 by Allison's Addiction HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Increase canvas size 700x700
Deleted copyright,bottom middle circle,all dashes,lower right & left rectangle

Click on upper middle circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper43
selection invert delete
select none delete the original

Click on upper left rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper18
selection invert delete
select none delete the original

Add noise to all outlines

Click on right upper rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper28
selection invert delete
select none delete the original

Click on left upper circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper41
selection invert delete
select none delete the original

Click on right lower circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper20
selection invert delete
select none delete the original

Click on large circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper20
selection invert delete
select none delete the original

Place your main tube where desired

Now time to add our elements
I used the following:
Element 7
Element 10
Element 14
Element 15
Element 25
Element 39
Element 71
Element 95
Element 101
Element 102
Element 108
Element 128
Element 135
Element 144
Element 145
Element 147
Element 148
Element 149
Element 151
Element 164
Element 177
Element 181
Element 183

Merge your layers
Open paper of choice & apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 27,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Cuddly Rigor Mortis
You must obtain a license to use at CDO HERE
PTU Scrapkit from Creative Scraps by Crys called Toasted Marshmallows HERE Kit and tube match
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
Open frame 1 & place in center of tag
Click inside frame with magic wand and expand by 10
Add new layer under frame and select all
Open paper 3 and paste into selection
Select none

Place your tube & build around it

Now time to add our elements
I used the following:
Chocolate Bar 2
Mini Marshmallows
Roasting Stick 1&2
Smore 2
Toasted Marshmallow
Vines
Word Art

Merge layers and add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 26,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Barbara Jensen
You can purchase her tubes at her store HERE
PTU Scrapkit by Purple Dream Scraps called The Raven
You can purchase this awesome kit at PFD HERE
Template #15 from Fired by Flamin HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright, word art,

Click on small blue retangles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on dark gry rectangles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original

Click on large circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on small circles 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on large blue rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Place your main tube

Now time to add our elements
I used the following:
Element 1
Element 6
Element 8
Element 19
Element 24
Element 27
Element 39
Element 41
Element 44
Element 46
Element 51
Element 55
Element 58
Element 68

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 26,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Spazzd Art
This tube was purchased at her store which has closed
You can purchase these tubes now at Hania's Design HERE
PTU Scrapkit by Purple Dream Scraps called Let's Rock
You can purchase this awesome kit at PFD HERE
Template #5 from Chrissy's Chaos HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright

Click on oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
add border with noise

On middle, left and right white squares add noise

Click on middle, left & right squares selections,select all, float,defloat
paste a paper of choice from the kit - I used paper15
selection invert delete
select none delete the original

On all white circles add noise and change colors if desired

Click on L&R circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on strip & add Xero Fritillary
Click on red strip, change colors and add noise
Click on white strip and add Xero Fritillary

Click on middle circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Click on yellow center  selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Place your main tube

Now time to add our elements
I used the following:
Element 16
Element 18
Element 23
Element 24
Element 25
Element 48
Element 55

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 26,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Andy Cooper
You must obtain a license to use at S&CO HERE
FTU Scrapkit by by Designs by Vaybs HERE Mask of choice

Ok Lets get Started:
This is a very quick and easy tutorial

Open blank canvas 700x700
Open element 24 and place to center
Using freehand tool draw around frame
Open new layer under frame and select all
Open paper of choice and paste into selection
Select none

Place tube to bottom of frame
I added close-up of tube inside the frame

Add any elements you want from the kit
I used:
Element 8
Element 15
Element 22
Element 23
Element 24
Element 28
I added a word art I found online

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 25,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Kajenna
You must obtain a license to use at PFD HERE
FTU Scrapkit by by Tasha's Playground called Summer Lolita HERE
Mask of choice

Ok Lets get Started:
This is a very quick and easy tutorial

Open blank canvas 700x700
Open frame 3 and place to center
Open tube of choice and place to back of frame making sure parts of tube are showing in frame
Select each frame and delete any parts showing outside frame
Select none
Merge tube and frame as one and ritate a little to the right
Place empty frame again beside other frame

Place tube between the 2 frames

Add any elements you want from the kit
I used:
Hearts
Glasses
Drink
Flair
Zipper Flower
Bow 2

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 25,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Toriya
You must obtain a license to use at S&CO HERE
FTU Scrapkit by by Honored Scraps HERE
Mask of choice

Ok Lets get Started:
This is a very quick and easy tutorial

Open blank canvas 700x700
Open frame 1 nd place to center
Click inside with magic wand and expand by 10
Open new layer under frame and select all
Open paper of choice and place into selection
Select none

Place tube to center

Add any elements you want from the kit
I used:
Element 1
Element 7
Element 8
Element 18
Element 20
Element 24
Element 29
Element 30

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 25,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You must obtain a license to use HERE
FTU Scrapkit from Melissaz Creationz HERE
My cluster frame HERE
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open cluster frame
Shift D to duplicate and close original
Add a new layer and send to bottom then flood fill with white
Delete copyright
Using freehand tool draw a circle around frame
Add new layer under frame
Open paper 15 and paste into selections
Select none
Effects, Texture, Mosaic Antique with settings of choice
Effects, Texture with settings of choice

I placed my tube to right of tag inside circle
Depending on tube you are using place where desired

Open element 26, resize and place at end of flower in pail
Open element 25, resize and place behind flower 26 to the right
Open element 42 and place between the 2 flowers
Open element 11, resize and place to left..duplicate then mirror
Open element 1, resize and place on top of watermelon
Open element 22, resize and place on top of pail to left
Close off background level and merge

Close off merge layers
Open element 4 and place in center - resize 75%
Move scatter to top of left corner
Open element 5 and place on top of green scatter
Merge these 2 layers as 1
Duplicate layer and mirror then flip to place at bottom of tag

Merge layers again then add mask of choice

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 13,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Enamorte
You can purchase these work at CDO HERE
PTU Scrapkit by Chichi Designz 33-1 also at CDO HERE
Tube and kit match
Template #1 by Amy's & Leah's Gimptastic Tuts  HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Increase template to your liking
Deleted copyright, word art and crown

Click on outer circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on inner circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original

Click on small circle 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original

Click on small circle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Place your tube to right of tag

Now time to add our elements
I used the following:
Element 1
Element 2
Element 8
Element 9
Element 10
Element 13
Element 14
Element 16
Element 17
Element 20
Element 25
Element 26
Frame 1
Wordart

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 25,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You must obtain a license to use HERE
PTU Scrapkit from Color Pixels called Take Me 2 The Ocean
Kit can be purchased at PFD HERE
Mask of choice

Ok Lets get Started:
Resize elements to your liking
This is a very quick and easy tutorial

Open blank canvas 700x700
In this tutorial it is about placing elements where you want them

Place your tube to center & build around it

Now time to add our elements
I used the following:
Elements 1
Elements 2
Elements 7
Elements 9
Elements 12
Elements 13
Elements 31
Elements 33
Elements 48
Elements 52
Elements 60
Elements 66
Elements 67
Elements 68
Elements 72
Elements 82
Elements 83
Elements 85
Elements 90
Elements 92
Elements 95
Elements 97
Elements 113
Elements 116

Merge layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 15,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Ted Hammond
Which you must obtain a license to use at CDO HERE
PTU Scrapkit by Foxys Designz at CDO HERE
Template #28 by Denz Designz HERE
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize layers to your liking
Delete copyright, studs & dotted circles

Click on raster 2 & copies of 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on back rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original

Click on middle rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on circle main selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on top circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Place your tube

Now time to add our elements
I used the following:
Element 2
Element 4
Element 6
Element 9
Element 10
Element 11
Element 13
Element 14
Element 16
Element 17
Element 19
Frame 1
Word Art

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 15,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental

This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Eskada
You can purchase this tube at Hania's Design HERE
PTU Scrapkit by Hania's Design called Sweet Honey HERE
Template #399 from Missy HERE
Link is to left of blog
Mask of choice

Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright & word art

Click on rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original

Click on circle 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original

Click on circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original

Click on square 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper8
selection invert delete
select none delete the original

Frame 1&2 add noise

Click on thin rectangle 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original

Click on rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original

Place your tube

Now time to add our elements
I used the following:
Element 8
Element 11
Element 12
Element 15
Element 20
Element 26
Element 30
Element 34
Element 35
Element 36
Element 40
Element 41
Element 46
Element 48
Element 54
Element 60
Element 75
Element 79
Element 93
Element 125

Merge your layers
Open paper of choice and apply mask

Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on July 15,2017 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental