Monday, November 30, 2015
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Scott Blair
This tube was purchased at MPT which has closed
I'm not sure where this artist is selling at now
PTU Scrap Kit by Laura from Tiny Turtles Design called Christmas Toys
You can purchase this kit at Tiny Turtles Store HERE
Template #6 by Dee HERE
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Deleted copyright,dotted circles,reindeer
Click on large brown square circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper16
selection invert delete
select none delete the original
Click on red circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
add noise
Click on green circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
Click on left red rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper21
selection invert delete
select none delete the original
Click on left light green rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
Click on right red rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper17
selection invert delete
select none delete the original
Click on green rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
Click on right light green rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
Click on white square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
Click on red square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original
Click on brown square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
Click on dotted square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
I left word art as it was
Place your tube
Now time to add our elements
I used the following:
Elements 4
Elements 18
Elements 23
Elements 58
Elements 65
Elements 102
Elements 110
Elements 115
Elements 119
Elements 122
Elements 172
Elements 183
Elements 184
Elements 186
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 3,2014 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Jose Cano
You must obtain a license to use HERE
PTU Scrap Kit by Amalie Designs called Christmas Fun
This kit can be purchased at Tiny Turtle Designs HERE
Beautiful kit to use over and over!!!!!!!!!!!!!!
Mask of choice
Ok lets get started:
This is a very quick and easy tutorial
Just place your elements where you want them
Open blank canvas 700x700
I started by placing my tube in center
Then I started adding elements around her
I used the following:
Element 1
Element 7
Element 20
Element 24
Element 28
Element 29
Element 35
Element 41
Element 44
Element 45
Element 62
Element 79
Element 84
Element 89
Element 90
Element 93
Element 97
Merge your layers
Open paper of choice & apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 30,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Sunday, November 29, 2015
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Vi Nina
You must obtain a license to use at S&CO HERE
FTU Scrap Kit by Stellajane Designs HERE
Kit is 3rd one down
Template #1 by Brutal Designs HERE
Mask #110 by Millie HERE
Ok lets get started:
Open template - Shift D to duplicate then close out original
Increase canvas size to 700x700
Delete copyright & gradient rectangle
Click on gradient square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
Click on grey square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
Click on grey oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
Click on beige circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original
Click on teal circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original
Place your tube
Now time to add our elements
I used the following:
Vine
Branch
Coaster 2
Heart
Poinsettia
Flower
Snow
WordArt Coaster
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 29,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
Which you must obtain a license to use HERE
PTU Scrap Kit by Aurelie from Purple Dreams Scraps called "Cold Winter"
You an purchase this awesome kit from one of her stores HERE
Template #175 by Denz Designz HERE
You can find them in the bulk downloads to right hand side of blog
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 112%
Increase canvas size 700x700
Delete copyright,all dotted circles,grey shape1 & narrow strips
Click on grey shape 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
Click on dark grey circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Click on large black circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
Click on white strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
Click on grey strip selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
Click on small circles selections,select all, float,defloat
paste a close-p of tube inside
selection invert delete
select none delete the original
I aded a border with noise
Place your tube
Xero Porcelin with settings of choice
Now time to add our elements
I used the following:
Element 8
Element 12
Element 13
Element 19
Element 20
Element 24
Element 25
Element 27
Element 28
Element 31
Element 37
Element 39
Element 40
Element 44
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 29,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Friday, November 27, 2015
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You must obtain a license to use HERE
PTU Scrap Kit by Amalie Designs called Very Merry Bright
This kit can be purchased at Tiny Turtle Designs HERE
Beautiful kit to use over and over!!!!!!!!!!!!!!
Mask of choice
Ok lets get started:
This is a very quick and easy tutorial
Just place your elements where you want them
Open blank canvas 700x700
I started by placing my tube in center
Then I started adding elements around her
I used the following:
Element 2
Element 4
Element 8
Element 16
Element 26
Element 31
Element 37
Element 39
Element 41
Element 46
Element 48
Element 52
Element 61
Element 68
Element 70
Element 86
Element 104
Merge your layers
Open paper of choice & apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 28,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You must obtain a license to use their art HERE
FTU Scrap Kit by PinkParadox Productions HERE
Template #190 by Toxic Desirez HERE
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 85% all layers
Increase canvas size to 700x700
Delete copyright
Click on raster 7 & copy of 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
Click on raster 5 & copy of 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper27
selection invert delete
select none delete the original
Click on raster 6 & copy of 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
Click on raster 3 & copy of 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper19
selection invert delete
select none delete the original
Click on raster 1 & copy of 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper22
selection invert delete
select none delete the original
Click on raster 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper28
selection invert delete
select none delete the original
Place your tube
Now time to add our elements
I used the following:
Element 6
Element 9
Element 13
Element 17
Element 18
Element 20
Element 24
Element 25
Element 26
Element 48
Element 49
Element 58
Element 66
Merge your layers
Open paper of choice and apply any mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 28,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Jose Cano
You must obtain a license to use his art HERE
PTU Scrap Kit by Creation by Sanie which can be purchased HERE
You can purchase the tube and kit together at Cano's store
Template by Ginnibug Designz HERE
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 82% all layers
Canvas size 700x700
Delete copyright & big strip
Click on rounded rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
Click on circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
Click on strips selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Click on rectangle 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
Add close-up of tube inside
Apply any filters to tube
Add a border around frame
Place your tube
Now time to add our elements
I used the following:
Element 3
Element 6
Element 9
Element 14
Element 15
Element 17
Element 19
Element 22
Element 24
Element 26
Merge your layers
Open paper of choice and apply any mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 26,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Jose Cano
You must obtain a license to use his art HERE
PTU Scrap Kit by Kizzed by Kelz which can be purchased HERE
You can purchase the tube and kit together at Cano's store
Mask #1 by Rachel Designs HERE
Check out all of her wonderful masks
Ok Lets get Started:
This is a very quick and easy tutorial
Open frame & place in center of tag
Grab the magic wand & click inside frame
Selections modify expand by 10
Add new layer under frame
Open paper 12 & paste into selections
Place your main tube
Now time to add our elements
I used the following:
Baubles
Cane Post
Cookies and Milk
Ornaments
Presents
Puppy
Ribbon
Santa Bear
Santa Hat
Snowflakes
Merge your layers
Open paper of choice & apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 26,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Keith Garvey
You must obtain a license to use HERE
FTU Scrap Kit by Tasha's Playground HERE
Template #44 by Just Like Candy Designs HERE
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 82% all layers
Increase canvas size to 700x700
Delete copyright & dots
Click on circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
Click on squares selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Click on center rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
Place your tube
Now time to add our elements
I used the following:
Bear
Candles
Cornucopia
Frame 2
Frame 3
Scarecrow
Tree
Wheel
Wordart
Merge your layers
Open paper of choice and apply any mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 27,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You must obtain a license to use their art HERE
FTU Scrap Kit by Sweet Addictionz Scraps HERE
Template #25 by Just Like Candy Designs HERE
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 82% all layers
Increase canvas size to 700x700
Delete copyright,right light brown square,
Click on center light brown circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper12
selection invert delete
select none delete the original
Click on left vertical rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
Click on middle rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Click on left peach circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
Click on right upper brown circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
Place your tube
Now time to add our elements
I used the following:
Element 14
Element 17
Element 18
Element 19
Element 20
Element 21
Element 22
Element 34
Element 35
Element 38
Element 41
Frame 3
Merge your layers
Open paper of choice and apply any mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 27,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Zlata_M
You can purchase these tubes HERE
PTU Scrap Kit by Scrappin With Lil Ole Me called Gather Together
You can purchase this awesome kit at Tiny Turtle Designs HERE
Template #733 by Millie HERE
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright & word art
Click on layer 1&2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper11
selection invert delete
select none delete the original
Click on layer 3&4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper13
selection invert delete
select none delete the original
Click on layer 5 circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper17
selection invert delete
select none delete the original
Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper18
selection invert delete
select none delete the original
Click on layer 7&8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper23
selection invert delete
select none delete the original
Click on layer 9 circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
Click on layer 10 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper22
selection invert delete
select none delete the original
Place your tube
apply Xero Radiance
Now time to add our elements
I used the following:
Element 1
Element 3
Element 8
Element 16
Element 22
Element 25
Element 36
Element 49
Element 67
Element 87
Element 94
Element 95
Element 112
Merge your layers
Open paper of choice & apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 27,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidenta
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You must obtain a license to use their art HERE
FTU Scrap Kit by PinkParadox Productions HERE
Mask of choice
Ok lets get started:
This is a very quick and easy tutorial
Open blank canvas 700x700
Open frame 7 & place in center of tag
Rotate to left
Grab the magic wand & click inside frame
Selections modify expand by 10
Add new layer under frame
Open paper 17 & paste into selection
I used a pixel font and wrote Furry Fall Friends
Apply Mura Meister Copies filter
Place your tube
Now time to add our elements
I used the following:
Element 6
Element 7
Element 8
Element 10
Element 18
Element 19
Element 67
Element 68
Element 70
Element 76
Merge your layers
Open paper of choice & apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 27,2015 by Rhonda
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of VeryMany
You must obtain a license to use their art HERE
FTU Scrap Kit by PinkParadox Productions HERE
Kit matches tube
Mask of choice
Ok lets get started:
This is a very quick and easy tutorial
Open element 54 & place in center of tag
Grab the magic wand & click inside frame
Selections modify expand by 10
Add new layer under frane
Open paper 18 & paste into selections
Place your tube
Now time to add our elements
I used the following:
Element 14
Element 15
Element 28
Element 29
Element 30
Element 31
Element 34
Element 39
Element 40
Element 42
Element 43
Element 45
Element 61
Element 68
Merge your layers
Open paper of choice & apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 27,2015 by Rhonda
Monday, November 23, 2015
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Trinita
You can purchase this work at PFD HERE
PTU Scrap Kit by Jen's Sweet Temptation HERE
Matching Cluster by Maria HERE
Mask of choice
Don't forget to leave a thank you when downloading
Open blank canvas 700x700
Open cluster and paste as new layer
Draw around frame using freehand tool
Add new layer under frame
Open paper 10 and paste into selection
Select none
Place your tube
Xero Radiance with settings of choice
Now time to add our elements
I used the following:
Bird 3
Door
Frame 2
Kitten
Owl 2
Pinecone 1
Merge your layers
Open paper of choice and apply mask
For my mask I used centerpiece element
Used Mura Meister with wallpaper settings
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 23,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Ellie_Milk
You can purchase this work at PFD HERE
PTU Scrap Kit by Jen's Sweet Temptation HERE
Template #6 by TTNA HERE
Mask of choice
Don't forget to leave a thank you when downloading
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Deleted copyright & layers 3,4,7,9,10
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
Place your tube to middle of tag
Xero Radiance with settings of choice
Now time to add our elements
I used the following:
Birdhouse
Boxes
Chipmunk
Cluster 1
Fountain
Frame 3
Ladder
Leaf Pile
Puppy
Squirel
Stump
Tree 3
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 23,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Vi Nina
You can purchase this tubes at S&CO HERE
I used different clusters for this tag
You can use my tag as an example of where to place
FTU Cluster HERE
FTU Cluster HERE
FTU Cluster HERE
FTU Cluster HERE
Wordart by Graphic Groupies HERE
Mask #6 by Allison HERE
Please leave some love when downloading freebies..A little thanks goes a long way
Resize elements to your liking
Ok Lets get Started:
Open blank canvas 700x700
Open cluster from Scrap A Million
Place close-up of tube inside frame
Open Mat's clusters and place behind cluster
Duplicate as many times as you want
Open cluster from Creative Elegance and place behind flowers
Again duplicate as many times as needed
Open Ribbon cluster from Arlene's Worn Out set
Place behind cluster and duplicate as needed
Merge frames as one layer
Open word art and color to match your tag
Merge layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 23,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Vadis
You can purchase this tube at PFD HERE
PTU Scrap Kit by Laura from Tiny Turtle Design called "Giving Thanks"
You an purchase this awesome kit at her store HERE
Template #760 by Millie HERE
Mask #17 by Ria's PSP Pardise HERE
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas 700x700
Delete copyright,text, layers 6,9&10
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper17
selection invert delete
select none delete the original
Click on layer 2 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper14
selection invert delete
select none delete the original
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper24
selection invert delete
select none delete the original
Click on layer 4 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper46
selection invert delete
select none delete the original
Click on layer 5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper45
selection invert delete
select none delete the original
Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper6
selection invert delete
select none delete the original
Place your main tube
Add Xero Radiance
Now time to add our elements
I used the following:
Element 21
Element 23
Element 33
Element 35
Element 36
Element 42
Element 50
Element 71
Element 72
Element 103
Element 124
Element 126
Merge your layers
Open paper 49 & apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 23,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidenta
Friday, November 13, 2015
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Arthur Crowe
You can purchase his tubes HERE
Matching Scrapkit by Designz by Vi also purchased HERE
You can check out Designz by Vi blog HERE
Mask of choice
Ok Lets get Started:
Open a blank 700x700 image
Open frame 3 and place in center
Click inside with magic wand & expand by 15
Open paper 5 & paste as new layer
Selections invert delete
Select none
Move paper under frame
Place your tube
Now add any other elements of choice
I used the following:
Element 11
Element 12
Element 13
Element 22
Element 39
Element 40
Element 51
Element 60
Element 62
Element 78
Merge your layers
Open paper of choice & apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 13,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Verymany
You can purchase these tubes HERE
PTU kit by Jen from Sweet Temptations called "Blustery"
You can purchase this kit from one of her stores HERE
Sweet Template by Miranda HERE
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright, layer 2
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
Click on layer 4&5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
Click on layer 9 selections,select all, float,defloat
add new layer and flood fill with color of choice
select none delete the original
Click on layer 10&12 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Place close-up in one of frames
I added gradient glow to word art
Place your tube
Xero Radiance with settings of choice
Now time to add our elements
I used the following:
Acorns
Bird 2
Branch
Centerpiece
Cheese
Corner
Grapes 1&2
Log
Log 1
Mushrooms
Pinecone 1
Rock 2
Squirrel 2
Wine
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Novemebr 13,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Verymany
You can purchase these tubes HERE
PTU kit by Jen from Sweet Temptations called "Blustery"
You can purchase this kit from one of her stores HERE
Sweet Template by Miranda HERE
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
delete copyright, layer 2
Click on layer 1 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
Click on layer 4&5 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
Click on layer 3 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
Click on layer 7 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper9
selection invert delete
select none delete the original
Click on layer 8 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
Click on layer 6 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper5
selection invert delete
select none delete the original
Click on layer 9 selections,select all, float,defloat
add new layer and flood fill with color of choice
select none delete the original
Click on layer 10&12 selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Place close-up in one of frames
I added gradient glow to word art
Place your tube
Xero Radiance with settings of choice
Now time to add our elements
I used the following:
Acorns
Bird 2
Branch
Centerpiece
Cheese
Corner
Grapes 1&2
Log
Log 1
Mushrooms
Pinecone 1
Rock 2
Squirrel 2
Wine
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Novemebr 13,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Alex Prihodko
You can purchase this work at Pics for Design HERE
PTU Scrapkit by Purple Dreams Scraps "Black Hat"
You an purchase this awesome kit from one of her stores HERE
Mask of choice
Ok Lets get Started:
This is a very quick and easy tutorial
Open blank 700x700 canvas
Open element 58 & paste as a new layer
Grab the magic wand and click inside frame
Open paper 2 and place as new layer
Selections invert delete
Place your tube where you want it and build around it
Add any other elements you want from the kit
I used:
Elements 1
Elements 7
Elements 10
Elements 13
Elements 14
Elements 21
Elements 22
Elements 23
Elements 36
Elements 45
Elements 53
Merge layers
Open paper of choice & apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 13,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Misticheskaya
You can purchase his work at PFD HERE
FTU Scrap Kit by Tasha's Playground HERE
Template #18 by Dee HERE
Mask of choice
Don't forget to leave a thank you when downloading
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Resize template 90% all layers
Canvas size 700x700
Deleted copyright & all leaf layers
Click on olive circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper01
selection invert delete
select none delete the original
Click on brownish rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper03
selection invert delete
select none delete the original
Click on rust square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper02
selection invert delete
select none delete the original
Click on left yellow rectangle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper05
selection invert delete
select none delete the original
Click on green circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper04
selection invert delete
select none delete the original
Click on dotted circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper05
selection invert delete
select none delete the original
Place your tube to bottom of tag
Xero Radiance with settings of choice
Now time to add our elements
I used the following:
Element 2
Element 4
Element 9
Element 10
Element 13
Element 15
Element 18
Element 25
Element 32
Element 34
Element 35
Element 36
Element 37
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 13,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Sunday, November 8, 2015
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Alex Prihodko
You can purchase his tubes from PFD HERE
FTU kit by Sylvie from Sylly Creation HERE
Sylvie says his is her first kit so give her some love if you download
Awesome kit Sylvie!!!!!!!!!!!!!!!!!!!!!!!
Mask of choice
Ok Lets get Started:
Open blank canvas 700x700
Open frame 2 resize and place to center
Open frame 4 resize and place on top of blue frame
Open frame 3 resize and place on top of striped frame
See my frame for example
Place your tube to left of tag
Add elements around the tube
Here are the ones I used:
Element 3
Element 16
Element 20
Element 21
Element 24
Element 28
Element 29
Element 30
Element 31
Element 36
Element 52
Element 55
Element 56
Merge your layers
Open paper 19 & apply mask of choice
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on November 7,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: Im using the wonderful art work of Elias Chatzoudis
This tube was purchased at MPT which has closed
You can purchase his work at his store HERE
FTU Scrapkit by HorsePlay's Pasture HERE
Mask of choice
Ok Lets get Started:
This is a very quick and easy tutorial
Open blank 700x700 canvas
Open element 43 & paste as a new layer
Rotate frame 90% to right
Click inside frame with magic wand
Expand by 10
Open paper 13 and place as new layer
Selections invert delete
Move uner frame
Place your tube where you want it and build around it
Add any other elements you want from the kit
I used:
Element 13
Element 17
Element 19
Element 20
Element 25
Element 27
Element 46
Element 48
Element 49
Element 50
Element 68
Element 71
Element 75
Element 87
Merge layers
Open paper 2 & apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on Novemger 7,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
This tutorial is written for those with knowledge of PSP
Supplies Needed:
Tube of choice: I'm using the wonderful art work of Jose Cano
Which you must obtain a license to use HERE
PTU Scrapkit by Jen from Sweet Temptations called "Scream Park"
You can purchase this awesome kit from one of her stores HERE
Template #18 by Dee HERE
Mask of choice
Ok Lets get Started:
Open template - Shift D to duplicate then close out original
Canvas size 700x700
Delete copyright,brackets,spider,word art & large dotted circles
Click on green circle selections,select all, float,defloat
paste a paper of choice from the kit - I used paper3
selection invert delete
select none delete the original
Click on purple squares selections,select all, float,defloat
paste a paper of choice from the kit - I used paper7
selection invert delete
select none delete the original
Click on teal circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper10
selection invert delete
select none delete the original
Click on orange square selections,select all, float,defloat
paste a paper of choice from the kit - I used paper1
selection invert delete
select none delete the original
Click on purple oval selections,select all, float,defloat
paste a paper of choice from the kit - I used paper2
selection invert delete
select none delete the original
Click on green circles selections,select all, float,defloat
paste a paper of choice from the kit - I used paper4
selection invert delete
select none delete the original
Place your main tube
Xero Radiance with settings of choice
Now time to add our elements
I used the following:
Bat in a Box
Bat N Moon
Coffin
Demon in a Box
Goblet
Gumball Machine
Hand
Kitty Bat
Lolli 2
Ribbon 1
Spider Skull
Tickets 2
Merge your layers
Open paper of choice and apply mask
Place your name where you like it
Add the Copyright and your License Number for the tube
Resize to your liking and save as PNG
This tutorial was created on October 17,2015 by Rhonda
Any resemblance to another Tag or Tutorial is purely coincidental
Wednesday, November 4, 2015
Subscribe to:
Posts
(Atom)
Grab My Blinkie
I CT For
Blogs I Visit
